Palm Access Point Configuration Policy - Novell ZENWORKS HANDELD MANAGEMENT 7 SP1 IR4 - ADMINISTRATION Administration Manual

2.4.6 Palm Access Point Configuration Policy

The Palm Access Point Configuration Policy lets you assign multiple ZENworks Handheld
Management Access Points to a device and also define the order of the ZENworks Handheld
Management Access Points to which the Palm OS device must connect. If the device is unable to
connect to the ZENworks Handheld Management Access Point configured first, then it
automatically tries to connect to the ZENworks Handheld Management Access Point configured
next in the sequence.
NOTE: The Palm Access Point Configuration policy is not supported on cradled Palm devices.
To configure the Palm Access Point Configuration Policy:
1 In ConsoleOne, right-click the Handheld Package or Handheld User Package object, then click
Properties.
2 On the Policies tab, click the down-arrow, then click Palm.
3 Select the check box under the Enabled column for the Palm Access Point Configuration
policy.
This both selects and enables the policy.
4 Click Properties.
This displays the Access Points - Configuration page.
Using ZENworks Handheld Management Policies 43