Table of Contents
Advertisement
iManager Plug-In for XDASv2
3
You can manage and configure eDirectory for XDASv2 auditing by using Novell iManager. Novell
iManager is a Web-based application that is used to manage, maintain, and monitor Novell
eDirectory through wired and wireless devices.The XDASv2 iManager plug-in is included with the
eDirectory installation.
NOTE: iManager plug-in is only for enabling and configuring XDASv2 events for eDirectory. This
plug-in does not apply to NMAS and Identity Manager.
Section 3.1, "System Requirements," on page 13
Section 3.2, "Installing iManager Plug-In for XDASv2," on page 13
Section 3.3, "Using iManager Plug-In Console for XDASv2," on page 13
Section 3.4, "Configuring XDASv2 Events for Auditing," on page 14
Section 3.5, "Securing the iManager Connection," on page 18
3.1 System Requirements
Installing and using the Novell Audit iManager Plug-in requires iManager 2.7.4. See
iManager Product Page (http://www.novell.com/products/consoles/)
instructions.
3.2 Installing iManager Plug-In for XDASv2
iManager plug-in for XDASv2 is, by default, installed with eDirectory.
3.3 Using iManager Plug-In Console for XDASv2
1 Log in to the iManager console.
1a Open iManager from a Web browser, using the following URL:
https://ip_address_or_DNS/nps/iManager.html
where ip_address_or_DNS is the IP address or DNS name of your iManager server.
For example:
http://192.168.0.5/nps/iManager.html
1b Log in using your username and password.
In iManager, you have access only to those roles for which you have assigned rights. To
have full access to all Novell iManager features, you must log in as a user with Admin
rights to the tree.
For more information, see
imanager27/imanager_admin_273/data/bsxrjzp.html)
2 Select Audit Configuration from Roles and Tasks.
3 Specify the NCP Server.
Accessing iManager (http://www.novell.com/documentation/
Novell
for requirements and download
iManager Plug-In for XDASv2
3
13
Advertisement
Table of Contents
