Configuring Xdas Events; Loading The Modules - Novell XDASV2 - ADMINISTRATION GUIDE V1 Administration Manual

# Minimum log-level allowed in syslog.
#log4j.appender.S.Threshold=INFO
# Defines the type of facility.
#log4j.appender.S.Facility=USER
# Layout definition for appender Syslog S.
#log4j.appender.S.layout=org.apache.log4j.PatternLayout
#log4j.appender.S.layout.ConversionPattern=%c : %p%m%n
# Defines appender R to be a Rolling File Appender.
#log4j.appender.R=org.apache.log4j.RollingFileAppender
# Log file for appender R.
#log4j.appender.R.File=/var/opt/novell/eDirectory/log/xdas-events.log
# Max size of log file for appender R.
#log4j.appender.R.MaxFileSize=100MB
# Set the maximum number of backup files to keep for appender R.
# Max can be 13. If set to zero, then there will be no backup files.
#log4j.appender.R.MaxBackupIndex=10
# Layout definition for appender Rolling log file R.
#log4j.appender.R.layout=org.apache.log4j.PatternLayout
#log4j.appender.R.layout.ConversionPattern=%d{MMM dd HH:mm:ss} %c : %p%m%n
XDASv2 Property File
Table 2-1
Options
Syslog Appender
Rolling File Appender

2.3 Configuring XDAS Events

See Chapter 3, "iManager Plug-In for XDASv2," on page 13
XDASv2 events for eDirectory.

2.4 Loading the Modules

After you have configured the XDASv2 events, run the following command to load the XDASv2
modules:
Linux/Solaris: Run the following command to load the XDASv2 modules:
ndstrace -c "load xdasauditds"
Windows: Run
then click Start.
If you have installed NMAS and enabled NMAS auditing, the NMAS server automatically loads the
XDASv2 library.
12 Novell XDASv2 Administration Guide
ID
S
R
, select xdasauditds option from the list of available modules,
ndscons.exe
Description
for information on configuring