Table of Contents
Advertisement
6.4.2 Installing a Plug-In When RBS Is Not Configured
If you do not have Role-Based Services (RBS) configured for Novell eDirectory
iFolder Manager Module as follows:
1 In a Web browser, log in to iManager on the iFolder server where you installed iManager.
2 In the toolbar, click the Configure icon (person seated behind a desk).
3 In Roles and Tasks, expand Module Installation, then click Available Novell Plug-In Modules.
4 Locate the iFolder iManager Module plug-in, select its plug-in check box, then click Install.
5 Click OK to dismiss the message, then close iManager.
6 Stop and start the Tomcat servlet engine by entering the following command at the terminal
7 Verify that the plug-in is enabled by opening iManager in a Web browser and checking to see if
8 Continue with
6.4.3 Installing a Plug-In When RBS Is Configured
If you are running iManager in Assigned Mode and have RBS configured for eDirectory, complete
the following steps to install the iFolder iManager Module.
IMPORTANT: To re-install an existing plug-in, you must first delete the rbsModule object for that
plug-in from eDirectory, using the Module Configuration > Delete RBS Module task.
1 In a Web browser, log in to iManager as an RBS Collection Owner on the system where you
2 In the toolbar, click the Configure icon (person seated behind a desk).
3 In Roles and Tasks, expand Module Installation, then click Available Novell Plug-In Modules.
4 Locate the iFolder iManager Module, select its plug-in check box, then click Install.
58
Novell iFolder 3.x Administration Guide
https://ifolder.example.com/nps/iManager.html
Replace ifolder.example.com with the IP address (such as 192.168.1.1) or the DNS
name of the iFolder server.
If you installed iManager on a different server in the same tree as your iFolder server, log in to
iManager on that server.
This install takes a few minutes. You should receive a message confirming a successful install.
console:
/etc/init.d/novell-tomcat4 restart
Tomcat sometimes requires several minutes to fully initialize. Wait at least 5 minutes before
trying to log in to iManager.
the Novell iFolder 3 plug-in appears in the list of Roles and Tasks.
For information, see
Section 6.5, "Accessing iManager and the Novell iFolder 3 Plug-In," on
page
59.
Section 6.6, "Provisioning Users and iFolder Services," on page
installed iFolder.
https://ifolder.example.com/nps/iManager.html
Replace ifolder.example.com with the IP address (such as 192.168.1.1) or the DNS
name of the iFolder server.
, install the
TM
60.
Advertisement
Table of Contents
