Prerequisites; Installing A Plug-In When Rbs Is Not Configured - Novell IFOLDER 3.7 - ADMINISTRATION Administration Manual

Hide thumbs Also See for IFOLDER 3.7 - ADMINISTRATION:
Table of Contents

Advertisement

6.5.1 Prerequisites

Novell iManager 2.7
If you have not already done so, install Novell iManager 2.7 on the same or different server as your
iFolder server. For information, see
www.novell.com/documentation/imanager25/imanager_install_25/data/hk42s9ot.html)
Role-Based Services
The iFolder 3 plug-in supports the optional use of Role Based Services (RBS) in Novell iManager.
RBS gives you the ability to assign specific tasks to iManager admin users and to present the admin
user with only the tools necessary to perform a specified set of tasks or manage only objects as
determined by their roles. What admin users see when they access iManager is based on their role
assignments in Novell eDirectory
For information, see
edir873/edir873/data/a31aexm.html)
www.novell.com/documentation/edir873/edir873/data/a2iii88.html)

6.5.2 Installing a Plug-In When RBS Is Not Configured

If you do not have Role-Based Services (RBS) configured for Novell eDirectory
iFolder Manager Module as follows:
1 In a Web browser, log in to iManager on the iFolder server where you installed iManager.
https://ifolder.example.com/nps/iManager.html
Replace
of the iFolder server.
If you installed iManager on a different server in the same tree as your iFolder server, log in to
iManager on that server.
2 In the toolbar, click the Configure icon (person seated behind a desk).
3 In Roles and Tasks, expand Plug-in Installation, then click Available Novell Plug-In Modules.
4 Locate the iFolder iManager Module plug-in, select its plug-in check box, then click Install.
This install takes a few minutes. You should receive a message confirming a successful install.
5 Click OK to dismiss the message, then close iManager.
6 Stop and start the Apache server by entering the following command at the terminal console:
/etc/init.d/apache2 restart
7 Verify that the plug-in is enabled by opening iManager in a Web browser and checking to see if
the Novell iFolder 3 plug-in appears in the list of Roles and Tasks.
For information, see
on page
8 Continue with
76
OES 2 SP1: Novell iFolder 3.7 Administration Guide
Novell iManager 2.7 Installation Guide (http://
. Only the roles and tasks assigned to that user are displayed.
TM
"Configuring Role-Based Services" (http://www.novell.com/documentation/
in the
ifolder.example.com
Section 6.7, "Accessing iManager and the Novell iFolder Web Admin,"
86.
Section 6.8, "Provisioning Users, Groups and iFolder Services," on page
Novell eDirectory 8.7.3 Administration Guide (http://
with the IP address (such as
, install the
TM
) or the DNS name
192.168.1.1
88.

Advertisement

Table of Contents
loading

Table of Contents