Novell IDENTITY AUDIT 1.0 - GUIDE Manual page 41

5 Specify the port on which the Identity Audit server will listen for messages from the event
sources. For more information, see
on page 42.
6 Set the appropriate client authentication and server key pairs settings. For more information,
see Section 5.3.2, "Client Authentication," on page
7 Select the Identity Audit server behavior when the buffer fills with too many events.
Temporarily pause connections: Drops the existing connections and stops accepting new
connections until the buffer has space for the new messages. In the meantime, messages are
cached by the event sources.
Drop oldest messages: Drops the oldest messages in order to accept new messages.
WARNING: There is no supported method for recovering dropped messages if you select
Drop oldest messages.
8 Select Idle Connection to disconnect event sources that have not sent data for a certain period
of time.
The event source connections are automatically re-created when they start sending data again.
9 Specify the number of minutes before an idle connection is disconnected.
Section 5.3.1, "Port Configuration and Port Forwarding,"
42.
Data Collection 41