Configuring Event Sources; Installing The Platform Agent - Novell IDENTITY AUDIT 1.0 - GUIDE Manual

17 Enter the password.
root
Identity Audit is configured to start up with runlevels 3 and 5 (Multi-User Mode with boot-up
in console or X-Windows mode).
After the Identity Audit service starts, you can log in to the URL (for example: https://
10.10.10.10:8443/novellidentityaudit) specified in the installation output.The system starts
processing internal audit events immediately, and it is fully functional after you configure event
sources to send data to Identity Audit.

3.3 Configuring Event Sources

Identity Audit 1.0 supports collecting log events from applications that were supported by the old
Novell Audit product and its Platform Agent. Before completing the steps in this section, ensure that
your Novell products are supported. For more information, see
Agent Version," on page
The 32-bits Platform Agent (http://download.novell.com/Download?buildid=1O9cbsOIO8Y~)
can be downloaded as part of the Novell Audit product.This URL is current for Audit 2.0.2
SP6.
The 64-bits Platform Agent (http://download.novell.com/Download?buildid=8hsF_lYQZJM~)
can be downloaded as a standalone client.This URL is current for 2.0.2 SP6.This URL is
current for Audit 2.0.2 SP6.
Section 3.3.1, "Installing the Platform Agent," on page 23
Section 3.3.2, "Configuring the Platform Agent," on page 24
Section 3.3.3, "Configuring the Auditing Level," on page 25

3.3.1 Installing the Platform Agent

The Platform Agent must be at least the minimum version recommended for Identity Audit. For
more information, see Section 2.4, "Supported Platform Agent Version," on page
appropriate Platform Agent (32-bits or 64-bits) must be installed or updated on all event source
machines.
The instructions for installing or upgrading the Platform Agent vary slightly by operating system.
The sample instructions below are for a 32-bits Linux* Platform Agent.
1 Download the .
iso
event source machine.
2 Create a directory for Audit. For example,
3 Log in as .
root
18.
file for the supported version of Novell Audit to the
mkdir -p audit202
Section 2.4, "Supported Platform
18. The
directory on the
/tmp
.
Installation 23