Table of Contents
Advertisement
The dbauser credentials are used to create tables and partitions in the PostgreSQL database.
Identity Audit is configured to start up with runlevels 3 and 5 (Multi-User Mode with boot-up
in console or X-Windows mode).
After the Identity Audit service starts, you can log in to the URL (for example: https://
10.10.10.10:8443/novellidentityaudit) specified in the installation output.The system starts
processing internal audit events immediately, and it is fully functional after you
sources
to send data to Identity Audit.
3.2.2 Non-root Installation
If organizational policy prohibits running the full installation process as
run in two steps. The first part of the installation procedure must be performed with
access, and the second part is performed as the Identity Audit administrative user (created during the
first part).
1 Log in as
to the server where you want to install Identity Audit.
root
2 Download or copy
identity_audit_1.0_x86-64.tar.gz
3 (Conditional) If the novell user and novell group do not exist on the server:
3a Extract the script to create the novell user and novell group from the Identity Audit tar file.
For example:
tar xfz identity_audit_1.0_x86-64.tar.gz identity_audit_1.0_x86-64/
setup/root_create_novell_user.sh
3b As
, execute the script by using this command:
root
identity_audit_1.0_x86-64/setup/root_create_novell_user.sh
The novell user and novell group will own the installation and the running processes of
Identity Audit.
4 Create a directory for Identity Audit. For example:
mkdir -p /opt/novell
configure event
, the installation can be
root
-level
root
to the
directory.
/tmp
Installation
21
Advertisement
Table of Contents
Need help?
Do you have a question about the IDENTITY AUDIT 1.0 - GUIDE and is the answer not in the manual?
Questions and answers