Novell GROUPWISE 8 - CLIENT Manual page 48

2 Click the tab that contains the options you want to change. Refer to the following sections for
information about options:
"Security Options: Password" on page 1120
"Security Options: Macros" on page 1121
"Security Options: Notify" on page 1122
NOTE: To see which Security options are recognized by the Linux/Mac client, refer to the
client options table
3 If you want to prevent users from changing an option's setting, click the lock button next to it.
After you click it, the lock button indicates whether the setting is locked at the domain level,
the post office level, or the user level.
4 If you want to return all the options on a tab to their default settings, click Restore Default
Settings.
5 When finished, click OK to save your changes.
Security Options: Password
The Password options let you reset a user's password and enable various methods by which a user
can set up the GroupWise client so that he or she does not have to enter a password at startup.
Figure 69-21
For background information about passwords, see
page 1151.
Enter New Password
This option is available only when setting client options for an individual user. You can use this
option to set or reset a user's password. You should advise the user to change the password as soon
as possible.
Retype Password
This option is available only when setting client options for an individual user. If you enter a new
password, verify it by retyping it in this field.
1120 GroupWise 8 Administration Guide
in Section 69.1, "Client Options Summary," on page
Security Options Dialog Box with the Password Tab Open
Chapter 74, "GroupWise Passwords," on
1085.