Novell GROUPWISE 7 - SECURITY ADMINISTRATION Manual page 16

for a server when you install eDirectory on that server. However, circumstances might arise where
you need to create one manually. You can do this in ConsoleOne.
1 Make sure that Novell International Cryptography Infrastructure (NICI) is installed on the
2 In ConsoleOne, click Help > About Snapins and verify that the following snap-ins are installed:
3 In ConsoleOne, check current SSL/TLS configuration of the LDAP server:
4 Export a trusted root certificate:
1124 GroupWise 7 Administration Guide
workstation where you run ConsoleOne.
If necessary, you can download NICI from the
download.novell.com).
Novell LDAP
Novell Certificate Server
Novell Modular Authentication Services (NMAS)
You can download these snap-ins from the
download.novell.com). After these snap-ins are installed, you can generate a trusted root
certificate for the LDAP server.
3a Browse to and right-click the LDAP Server object in your eDirectory tree (typically
named LDAP Server - server_name), then click Properties.
3b Click SSL/TLS Configuration.
3c Note the name of the server certificate (typically SSL CertificateDNS).
3d Make sure that Disable SSL Port is not selected.
4a Browse to and right-click the SSL Certificate object identified in
Properties.
4b Click Certificates.
Novell Product Downloads site (http://
Novell Product Downloads site (http://
Step 3c, then click