Novell ENHANCED SMART CARD METHOD 3.0.1 - INSTALLATION 17-07-2007 Installation Manual page 18

Figure 2-11
9 Select the communication interface the method will use to connect to the smart card, then click
Figure 2-12
10 Click Install.
You can distribute the method to each workstation automatically using tools such as Zenworks
See Appendix A, "Silent Method Installation on Workstations," on page 45
about scripting the method install.
18 Novell Enhanced Smart Card Method Installation Guide
Use an ampersand (&) in the description to enable Windows' Alt+letter functionality. In the
example below, Alt+P would place focus on the field labeled with the "PIN:" description.
Customized Password Field Description
Next.
PC/SC functionality is the preferred interface. Select PKCS#11 if you know the smart card
middleware does not integrate with the Windows PC/SC functionality. If you select PKCS#11,
you must also specify a name of the module that is to be used.
Smart Card Interfaces Page
®
.
for detailed information