Novell Enhanced Smart Card Method Installation; Minimum Requirements; Edirectory Server; Client Workstations - Novell ENHANCED SMART CARD METHOD 3.0.1 - INSTALLATION 17-07-2007 Installation Manual

Novell Enhanced Smart Card
2
Method Installation
This section describes the installation of the Novell
Section 2.1, "Minimum Requirements," on page 11
Section 2.2, "Installing the Method," on page 12

2.1 Minimum Requirements

NESCM has the following minimum requirements:
Section 2.1.1, "eDirectory Server," on page 11
Section 2.1.2, "Client Workstations," on page 11

2.1.1 eDirectory Server

eDirectory 8.7.3 IR9 or eDirectory 8.8 SP1 on one of the following platforms:
TM
®
NetWare 6.5 SP6 or later
Windows 2003 Server SP1 or later
®
Linux* SUSE Linux Enterprise Server (SLES) 10 32-bit or 64-bit
Red Hat* AS 4.0 Server 32-bit or 64-bit

2.1.2 Client Workstations

Novell Client 4.91 SP3 installed on Windows XP SP2
TM
A smart card reader and appropriate smart card middleware must be installed and properly
configured on the workstation. The method should work with any Windows XP compliant PC/SC
middleware. It has been tested with the following:
Middleware:
Netsign* CAC version 5.5.71.0
Gemplus* version 3.2.2 and 4.2
ActivCard* Gold for CAC 3.01
ActivClient* 6.0 PKI Only
CryptoVision* cv act sc/interface 3.2.1
eToken* Run Time Environment 3.60
DataKey* CIP 4.07
®
Enhanced Smart Card Method (NESCM).

Novell Enhanced Smart Card Method Installation

2
11