Imonitor Message Filtering - Novell EDIRECTORY 8.8 SP5 - GUIDE 12-2009 Manual

Figure 15-2
4 Click on the Screen tab.
5 Select the filter option from the Filters group and enter the filter value.
You can filter the messages based on:
Thread ID
Connection ID
Severity
Before selecting any of the filters, ensure that it is enabled under Trace Line Prefixes.
You can also disable the filtering by selecting None or unselecting the filter option.
NOTE: If you've selected Thread ID or Connection ID as your filter option and enter a value
that does not exist, then the messages won't be displayed on the screen. However, all the other
messages will still get logged to the

15.4 iMonitor Message Filtering

You can filter the iMonitor trace messages based on the connection ID, thread ID, or error number.
To filter based on the connection ID and thread ID, ensure that you have enabled them in the Trace
Configuration tab.
80 Novell eDirectory 8.8 What's New Guide
Trace Options Screen on Windows
file.
ndstrace.log