Imonitor Message Filtering - Novell EDIRECTORY 8.8 SP2 - GUIDE 10-2007 Manual

Figure 11-2
4 Click on the Screen tab.
5 Select the filter option from the Filters group and enter the filter value.

11.4 iMonitor Message Filtering

You can filter the iMonitor trace messages based on the connection ID, thread ID, or error number.
70 Novell eDirectory 8.8 What's New Guide
The Novell eDirectory Trace Options dialog box is displayed.
Trace Options Screen on Windows
You can filter the messages based on:
Thread ID
Connection ID
Severity
Before selecting any of the filters, ensure that it is enabled under Trace Line Prefixes.
You can also disable the filtering by selecting None or unselecting the filter option.
NOTE: If you've selected Thread ID or Connection ID as your filter option and enter a value
that does not exist, then the messages won't be displayed on the screen. However, all the other
messages will still get logged to the ndstrace.log file.