Configuring Login Settings - Novell CLIENT FOR LINUX 2.0 - ADMINISTRATION Manual

4 Click Start Wizard.
5 Follow the instructions in the left panel to configure Novell Client settings.
6 Click Finish.
7 Restart the workstation to ensure that the settings take effect.
Any changes you make to the Novell Client settings are written to a set of configuration (.conf)
files in the /etc/opt/novell/ncl directory.
IMPORTANT: When the Novell Client software is uninstalled, these settings are not saved.

2.1.1 Configuring Login Settings

Use the Login Settings page in the Novell Client Configuration Wizard to configure the settings
available to users in the Novell Login dialog box.
Figure 2-1
This page contains the following options:
14 Novell Client 2.0 for Linux Administration Guide
Protocol
Tray Application
File Browser
Service Location Protocol (OpenSLP)
If you made changes to the Protocol Settings page or the Service Location Protocol (OpenSLP)
Settings page, you must reboot the machine for those changes to take effect.
Login Settings Page
NMAS Authentication: Enables or disables Novell Modular Authentication Services
(NMAS ) during login. NMAS authentication can add additional security to the network, but
TM