Configuring Openslp Settings - Novell CLIENT FOR LINUX 2.0 - ADMINISTRATION Manual

Volume Statistics: Enables or disables the Volume Statistics tab on the Volume Properties page
(available when users right-click a Novell file system volume in a file manager and then click
Novell Properties).

2.1.6 Configuring OpenSLP Settings

Use the Service Location Protocol (OpenSLP) Settings page in the Novell Client Configuration
Wizard to specify where and how the Client requests network services.
In an IP-only network, the Novell Client needs a way to resolve the eDirectory tree, context and
server names to an actual IP address of an eDirectory server that can provide authentication. On a
simple LAN, the client can send an IP broadcast to discover this information, but on a multisite
WAN, the SLP scope and Directory Agents must be listed.
Service Location Protocol (OpenSLP) Settings Page
Figure 2-6
This page contains the following options:
Scope List: Specify the scopes that a user agent (UA) or service agent (SA) is allowed when
making requests or registering, or the scopes that a directory agent (DA) must support.
Directory Agent List: Specify the specific DAs that UA and SA agents must use. If this
setting is not used, dynamic DA discovery is used to determine which DAs to use.
Broadcast Only: Select this option to use broadcasting instead of multicasting. This setting is
not usually necessary because OpenSLP automatically uses broadcasting if multicasting is
unavailable.
SLP is designed to use IP multicasting; however, if any SLP Agent does not implement IP
multicasting, then all Agents must use broadcasting to reach that Agent. If a DA does not
support multicasting, we recommend using the Directory Agent List to configure that Directory
Agent rather than using this option.
Configuring the Novell Client for Linux 19