Configuring Login Settings - Novell CLIENT FOR LINUX 2.0 SP3 - ADMINISTRATION Administration Manual

Map
Protocol
Tray Application
File Browser
Service Location Protocol (OpenSLP)
4 Click Start Wizard.
5 Follow the instructions in the left panel to configure Novell Client settings.
6 Click Finish.
7 Restart the workstation to ensure that the settings take effect.
If you made changes to the Protocol Settings page or the Service Location Protocol (OpenSLP)
Settings page, you must reboot the machine for those changes to take effect.
Any changes you make to the Novell Client settings are written to a set of configuration (
files in the
IMPORTANT: When Novell Client software is uninstalled, these configuration files are also
removed.

2.1.1 Configuring Login Settings

Use the Login Settings page in the Novell Client Configuration Wizard to configure the settings
available to users in the Novell Login dialog box.
Figure 2-1
14 Novell Client 2.0 SP3 for Linux Administration Guide
/etc/opt/novell/ncl
Login Settings Page
directory.
)
.conf