Novell ACCESS MANAGER 3.1 SP2 - J2EE AGENT GUIDE 2010 Manual page 56

11 In the Path List on the Path-Based Multi-Homing page, configure the paths.
Remove Path on Fill Service: If the path is removed before sending the request to the
J2EE server, the path specified here must allow public access (no authentication required)
to the nesp application. A path is automatically created for you (in this example,
and a protected resource is assigned. Click the Protected Resource link, verify that the
contract for this resource is None and the path is
If the wrong type of protected resource is assigned, return to
resource that allows public access.
Keep Path on Fill Service: If you are keeping the path, select the default path and delete
it. Click New, specify the path to the nesp application (for example,
click OK. The protected resource that you created for this path should be automatically
assigned to the path.
Create the path to the application. Click New, specify the path to the application (for
example,
this path should be automatically assigned to the path.
If the wrong protected resource is assigned, return to
with the correct paths.
12 Click the Web Servers tab.
13 To configure SSL, select Connect Using SSL.
This option is not available if you have not set up SSL between the browsers and the Access
Gateway. See
the Novell Access Manager 3.1 SP2 Access Gateway Guide
Browser and Access Gateway field.
14 Configure how you want the certificate verified.
To not verify this certificate, select Do not verify.
To allow the certificate to match any certificate in the trust store, select Any in Reverse
Proxy Trust Store. Continue with
To add a certificate to the trust store for the application server, click the Manage Reverse
Proxy Trust Store icon. Continue with
The auto import screen appears.
56 Novell Access Manager 3.1 SP2 J2EE Agent Guide
), then click OK. The protected resource that you created for
/j2ee/payroll
"Configuring SSL Communication with the Browsers and the Identity Server
Step
, then click OK.
/*
Step 8
Step 8 and create protected resources
and select the Enable SSL between
18.
Step 15.
)
/j2ee
and create a protected
), then
/j2ee/nesp
" in