CITROEN C5 Owner's Handbook Manual page 155

D I e s e L I N J e C T I O N e q U I P M e N T
2
1

Protective cover for hDi 138
engines:
Remove the protective cover by
first unclipping at 3, then 1 and .
Unclip at 2 by pulling towards you,
then lift up.
To refit the protective cover, firstly
clip in at 2. Lower and centre the
cover. Clip in at 3 and , pushing
vertically and gently from the rear.
Clip in at 1 pushing vertically.
Protective cover for hDi 110,
hDi 173 and v6 hDi 208
engines:
Pull the protective cover upwards
to remove.
3
Draining water from the fuel
filter
Drain regularly
change).
To drain the water, slacken the
bleed screw or the water in diesel
fuel sensor, located at the base of
the filter.
Continue until all the water has
flowed out.
Then retighten the bleed screw or
the water detection sensor.
hDi engines are the result of advanced technology.
Any intervention requires special qualifications which only a
(at each oil
CiTrOËn dealer can guarantee.
v
151