Advertisement
Quick Links
ASSEMBLY INSTRUCTION FOR ACME FURNITURE
MODEL#97370/97372/97374
Thank you for purchasing the quality product. Be sure to check all packing material carefully for small parts which
may have come loose inside the carton during shipment. Separate, identify and count all parts and metal hardware.
Compare with all parts are present. If any part(s) are missing or damaged, please contact your local furniture dealer.
For efficient and speedy service, please indicate the model number and code letter of part(s) needed.
***Do not fully tighten screws until fully assembled.***
Assembly Instructions Video
Advertisement
Related Manuals for Acme Furniture Elms 97370
Summary of Contents for Acme Furniture Elms 97370
- Page 1 ASSEMBLY INSTRUCTION FOR ACME FURNITURE MODEL#97370/97372/97374 Thank you for purchasing the quality product. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Separate, identify and count all parts and metal hardware.
- Page 2 Because our products may be challenging for beginners, we deeply understand that you may encounter some difficulties. To avoid discouragement, we have provided some useful tips, as follows. Enough Open Space Ensure that there is enough space for movement during assembly.
- Page 3 Every cam bolt must have a cam lock connector to hold the parts together. When assembling, the hardware parts and the wooden board must be kept vertical, and the tools must be in full contact with the hardware groove. Caution: Do not use excessive force to advoid over- fastening, or even...
- Page 4 The holes of the slide rail are in the same direction as the following page. 1 2 3 Inner rail with narrower width: fixed on the side panel of the Front 1 2 3 product. 1 2 3 Caution: The second hole shown here is the hole position fixed on the slide rail when installing the drawer.
- Page 6 Attention Some number parts listed on the instruction sheet may not be in parts bag as they may already be assembled. Carefully check parts and packing materials prior to ordering replacements.
- Page 7 1)Front side of slide rail needs to match front shape of the board. Front 2)Tighten the screws in the second hole in the front and the rear end of the inner rail. Front...
- Page 8 1)Front side of slide rail needs to match front shape of the board. Front 2)Tighten the screws in the second hole in the front and the rear end of the inner rail. Front...
- Page 10 Front Insert in as arrow direction to specify...
- Page 11 Caution: Please do not drag or use the corner to lift the product, especially after the cabinet feet are installed.When the product needs to be moved or turned, it must be raised.
- Page 12 Extend the two outer slides of the runners so that they could align with the sides of the drawer. Make sure the pre-drilled holes from the drawer align with the screw holes of the outer slides. Secure two screws from the inside of the drawer using a Phillips screwdriver to tighten them to the outer slides.
- Page 13 Caution: Do not to place heavy items or clothing that exceed the side height of the drawer. Wall For safety,please use the strap to secure the unit on the wall. ASSEMBLY IS COMPLETED. Make sure the product is rested on a flat surface and does not feel loose or wobbly. If it does, double check that the bolts/screws are secured and properly tightened.
Need help?
Do you have a question about the Elms 97370 and is the answer not in the manual?
Questions and answers