Acme Furniture Eos BD00547 Assembly Instruction Manual

Rectangular wooden frmae mirror in walnut black

Download this manual

ASSEMBLY INSTRUCTION FOR ACME FURNITURE

MODEL#BD00547

Thank you for purchasing the quality product. Be sure to check all packing material carefully for small parts which

may have come loose inside the carton during shipment. Separate, identify and count all parts and metal hardware.

Compare with all parts are present. If any part(s) are missing or damaged, please contact your local furniture dealer.

For eﬃcient and speedy service, please indicate the model number and code letter of part(s) needed.

***Do not fully tighten screws until fully assembled.***

Need help?

Do you have a question about the Eos BD00547 and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTION FOR ACME FURNITURE MODEL#BD00547 Thank you for purchasing the quality product. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Separate, identify and count all parts and metal hardware.
Page 2 Because our products may be challenging for beginners, we deeply understand that you may encounter some diﬃculties. To avoid discouragement, we have provided some useful tips, as follows. Enough Open Space Ensure that there is enough space for movement during assembly.
Page 4 Attention Some number parts listed on the instruction sheet may not be in parts bag as they may already be assembled. Carefully check parts and packing materials prior to ordering replacements.
Page 5 Caution: Because the back of the board is a mirror, do not use an electric screwdriver in this step. Avoid the screw passing through the A panel and cause the mirror to be damaged, and pay attention to the tightening force of the screw to be moderate.
Page 6 Straight Horizontal...
Page 7 Wall For safety, please use the strap to secure the unit on the wall. ASSEMBLY IS COMPLETED. Make sure the product is rested on a ﬂat surface and does not feel loose or wobbly. If it does, double check that the bolts/screws are secured and properly tightened.