Scosche MAGICMOUNT MAGWDM Manual

Register your product online at
FOR MOBILE DEVICES & SMALL TABLETS (8 INCHES OR LESS)
pARTS INCLUDED
(1) Magnetic mount with suction
cup mount and flexible neck
(1) Small metal plate
(1) 3M mounting disc for suction cup mount
1
MOUNTING THE METAL pLATE
note: This item is not to be used with any Qi
Wireless Charging products as the metal plates can
cause extreme heat that can cause burns and/or
damage the device.
DEVICE
OpTION 3
(large plate only):
Attach adhesive side of
metal plate to interior
of case, between
device and inside
of case. Plate will
adhere to magnetic
mount through rear
panel of case.
note: If choosing not to attach the metal plate
to the device or case, please leave the adhesive
backing in place. Position the plate between the
device and interior of case with the metal surface
facing the case.
©2014 SCOSCHE INDUSTRIES, INC.
MAGNETIC FLEX MOUNT
(1) Large metal plate
OpTION 1 (small or large plate):
Attach adhesive side of metal plate
directly to back of device.
DEVICE
ADHESIVE SIDE
www.scosche.com/register
READ INSTRUCTIONS COMPLETELY BEFORE INSTALLING
THIS MOUNT KIT.
WARNING: Use caution whenever removing or
handling plastic parts of any vehicle.Unnecessary force or pressure can cause
pieces to crack or break. Please use a plastic card to remove the metal plates.
Remove adhesive residue with a non-abrasive cleaner.
OpTION 2
(small or large plate):
Attach adhesive
side of metal
plate directly
to back of case.
CASE
OpTION 4 (small plate only):
Similar to Option 3, attach the
plate to the interior of the
device's rear battery compartment cover (if
space and design permit). Plate will adhere to
magnetic mount through the rear battery cover.
For more information please visit www.scosche.
com/magmount.
MAGIC
MAGWDM/MAGWDMI
ADHESIVE SIDE
adhesive side of the small
SI 300MAGWDM/MAGWDMI (ENGLISH) 12/13
MOUNT
CASE