Scosche MAGICMOUNT XL Manual

Register your product online at
WitH BEnDABLE FLEX nECK FOR tABLEt DEViCES
pARtS inCLUDED
(1) Magnetic mount with suction
cup mount and bendable neck
(1) Small metal plate
(1) XL plate
(1) Cleaning wipe
1
MOUntinG tHE MEtAL pLAtE
CAUtIon: This item is not to be used with any
Qi Wireless Charging products as the metal
plates can cause extreme heat that can cause
burns and/or damage the device.
OptiOn 1 (small or XL plate):
Attach adhesive side of metal plate
directly to back of device.
DEViCE
©2015 SCOSCHE INDUSTRIES, INC.
MAGnEtiC DASH MOUnt
READ inStRUCtiOnS COMPLETELY BEFORE inStALLinG tHiS MOUnt Kit.
WARninG: Do not use the magnetic mount with any hard-drive based devices such
as: iPod classic, iPod video and Zune MP3 players. Use caution whenever removing or
handling plastic parts of any vehicle. Unnecessary force or pressure can cause pieces to
crack or break. Please use a plastic card to remove the metal plates. Remove adhesive
residue with a non-abrasive cleaner.
OptiOn 3
(XL plate only):
Attach adhesive side of
metal plate to interior
of case, between
device and inside
of case. Plate will
adhere to magnetic
mount through rear
panel of case.
note: If choosing not to attach the metal plate
to the device or case, please leave the adhesive
backing in place. Position the plate between the
device and interior of case with the metal surface
facing the case.
www.scosche.com/register
MAGiC
OptiOn 2
(small or XL plate):
Attach adhesive
side of metal
plate directly
to back of case.
ADHESiVE SiDE
SI 300MAGTHD2/MAGTHD2I (ENGLISH) 12/14
MOUnt
MAGtHD2/MAGtHD2i
DEViCE
CASE
XL
CASE