Table of Contents
Advertisement
OPERATION
To access the PREFS menu press [SPECIAL], and select
<5prefs>. The display is:
Select the desired function.
See Sections 3.6.5.1 to 3.6.5.3 for detailed information on each PREFS function.
3.6.5.1
<1ScrSVR>
PRINCIPAL
To adjust the time setting of molbox1+'s SCREEN SAVER function.
PRINCIPAL
molbox1+ has a SCREEN SAVER function which causes the display to dim after
a front panel key is NOT pressed for a certain amount of time. The default
screen saver time activates the screen saver after 10 minutes. The screen saver
activation time can be adjusted by the user or screen saving can be completely
eliminated.
OPERATION
To access the SCREEN SAVER function, press [SPECIAL] and select
<5prefs>, <1ScrSav>. Edit the time, in minutes, after which the screen saver will
activate to dim the screen. Set zero to eliminate the SCREEN SAVER function.
Setting screen saver time to zero eliminates the SCREEN
SAVER function so that the display permanently remains at full
brightness.
3.6.5.2
<3ID>
PURPOSE
To view or edit the molbox1+ user ID and to view the molbox1+ serial number.
PRINCIPAL
molbox1+ has a factory programmed serial number that is included on the
product back panel and can be viewed in the introductory screen.
molbox1+ also allows the user to store a unique, twelve character, alpha numeric
ID number. This feature is frequently used to assign an organizational control ID
(e.g., an asset number, tool number, standard number, etc.). The ID function
allows the ID number to be viewed and edited. It also displays the molbox1+
factory serial number.
OPERATION
To access the ID function press [SPECIAL] and select <5prefs>, <2ID>.
Select <1view> to view the current ID.
Select <2edit> to edit the ID.
The ID has twelve characters. When the edit screen is opened, the cursor is on
the first character. Numerical values can be entered directly from the keypad.
In addition, the [←] and [→] keys can be used to toggle through a list of available
alpha numeric characters. Holding the key slews through the characters.
Character order going up ([→]) is: blank space, symbols, lower case letters,
upper case letters, numbers. After selecting a character, press [ENTER] to
activate it and move to the next character field.
Note
Page 103
© 1995 - 2010 Fluke Corporation, DH Instruments Division
3. OPERATION
1ScrSvr 2ID 3time
Advertisement
Table of Contents
