Related Manuals for EVIKA SJ160
Summary of Contents for EVIKA SJ160
- Page 1 www.evikasprayer.com Instruction Manual For Battery Sprayer Warning: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
- Page 2 Spare parts: Item Item Item Big Cap Battery Cover J trigger Valve Lock Assembly Hose Assembly O-ring Base Part Stepless Shift Control Filter Double Precision Nozzle Middle Part Tank Lance Screw 18V Lithium Battery Lance clip Pump...
- Page 3 Safety instructions and cautions for lithium battery: • Lithium battery needs to be charged indoors not outdoors, so as to avoid accidents. • When the lithium battery needs charging, please take it out from the product, and plug into the charger, if the light turns red, which shows it’s charging, when the light turns green, which means it’s full charged.
- Page 4 instructions: Open the cap Pour in solvent and water Stepless shift switch 1.Stepless shift switch the switch 2.When adjusting the switch, the power will gradually increase in the clockwise direction,and when adjusting the switch, the power in the counter clockwise direction will gradually increase J Trigger...
- Page 5 Assemble instructions： 1. Open the battery cover (battery compartment clasp) as shown in Figure 1. 2. Insert the battery into the battery compar tment as shown in Figure 2. 3. Close the battery cover as shown in Figure 3，and then| ock the tower buckle. 4.
- Page 6 5. When the battery is fully charged, remove it from the charger and turn off the charger. Green light, full Red light, charging Input:100-240V~50-60HZ, Output:13.1V 1.4A PRODUCT INFORMATION/TECHNICAL DATA: Item No. SJ160 Total capacity 16.0L Voltage Curren flow 0.50A Battery capacity 2.5 Ah...
- Page 7 Spayer Storage: Storage The most important thing to remember before storing your spraye’s lithium-ion battery is fully charged and the power switch is turned off. 1. Make sure the battery is fully charged. 2. Make sure the switch is off. 3.
- Page 8 Fault resolution: Problem Reason Solution 1.unscrew the sprinkler head and tighten the thorough flush filter The sprayer is broken, 1.Filter is blocked 2.Send it to the authorized dealer of the 2.Water pump failure but there is vibration maintenance service center or the company’s after-sales service by mail and phone After the power is turned on , 1.Water pump failure...
Need help?
Do you have a question about the SJ160 and is the answer not in the manual?
Questions and answers