Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
SPECIFICATIONS
Voltage................................................................................................................ 120VAC, 60HZ
Load(Single Pole Circuit)
Incandescent Lamp.....................................................................................................800W
Fluorescent Lamp......................................................................................................800VA
Motor.......................................................................................................................... 1/4 HP
Time Delay....................................................................................1, 5, 10, 15, 20, & 30 Minutes
Humidity............................................................................................. 95% RH, non-condensing
Operating Temperature........................................................................32° to 131° F (0° to 55° C)
DESCRIPTION
The HET06A-R is a timer switch with 6 preset time buttons and 1 Manual ON button. All
Loads connect to this timer will automatically turn OFF when the selected time expires. The
6 selectable times are 1, 5, 10, 15, 20, and 30 Minutes.
FEATURES
• Easily replaces a standard single pole Light or Fan switch.
• Compatible with most types of lights.
• Very bright LED Night and indicator lights.
• Attractive blue LED indicators conveniently located next to each button.
• Indoor use only .
Preset In-Wall Countdown Timer
1
HET06A-R
Advertisement
Related Manuals for Enerlites HET06A-R
Summary of Contents for Enerlites HET06A-R
- Page 1 Operating Temperature................32° to 131° F (0° to 55° C) DESCRIPTION The HET06A-R is a timer switch with 6 preset time buttons and 1 Manual ON button. All Loads connect to this timer will automatically turn OFF when the selected time expires. The 6 selectable times are 1, 5, 10, 15, 20, and 30 Minutes.
- Page 2 WARNING Turn the POWER OFF at the circuit breaker before installing the Timer Read and understand these instructions before installing. It is recommended that a qualified electrician performs this installation. Make sure to turn off the circuit breaker or fuse(s) and make sure power is off before wiring the device.
- Page 3 To the fullest extent permitted by the applicable state law, Enerlites shall not be liable to the purchaser or end user customer of Enerlites products for direct, indirect, incidental, or consequential damages even if Enerlites has been advised of the possibility of such damages.
Need help?
Do you have a question about the HET06A-R and is the answer not in the manual?
Questions and answers