Other Phones - Nokia 5190 - Cell Phone - GSM User Manual

To switch connection type while using Content Copier:
Establish the appropriate connection between your phone and PC, then
1
click the Connection button.
Click the desired connection type, then click Select.
2
Allow Nokia Connection Manager to detect your phone.
3
Click OK to return to Nokia Content Copier.
4
If your phone is not detected right away, switch to one of the other connection
types, then back to the desired connection type. This forces Connection
Manager to redetect your phone.
Note: If you are copying data from one phone to another and the source
phone uses an infrared connection, stop the infrared connection between source phone and PC. Allow the Windows warning
message regarding interrupted infrared communications to completely time-out before aligning the target phone with your
PC's infrared port. By doing so, you allow Connection Manager to detect your phone more quickly.
Nokia Content Copier log
When you have successfully completed one of the Nokia Content Copier tasks,
the Finish screen is displayed along with a log of the tasks that were just
performed. At the Finish screen, you have the following options:
Click Save to save the log (.LOG) file to your PC's hard drive.
•
• Click New Action to return to the beginning of the Nokia Content Copier
wizard.
Click Finish to exit Nokia Content Copier.
•

• OTHER PHONES

Due to software and hardware differences between generations of phone
technology, the following phones are not compatible with Content Copier:
Protocol Nokia model number
TDMA
5120, 5125, 5160, 5165
6120/6120i, 6160/6160i/6160m
6161/6161i, 6162/6162i/6162m, 8260, 8265
CDMA
5170/5170i, 5180/5180i, 5185
6180/6180i, 6185/6185i
GSM1900
[ 7 ]
3320
3280, 3285
3390, 3395, 3590
Nokia Content Copier
3