Related Manuals for Branch Desk Drawer
Summary of Contents for Branch Desk Drawer
- Page 4 Small Desk Drawer for 36” Duo Standing Desk Large Desk Drawer for the 48” and 58” Duo Standing Desk for all sizes of the Daily Desk...
- Page 5 Threaded Hole Place your Duo Desk upside-down on a clean flat surface. Position the Desk Drawer on the desktop so that the drawer opens towards the front of the desk. Align the mounting holes on the Drawer to the Threaded Holes in the Desktop. Tightly secure the Drawer with the Drawer Screws (x4) using the 4mm Allen Wrench.
- Page 6 The Daily Desk uses modular Frame Rails with hidden Rail Connectors, one of which needs to be removed to install the Desk Drawer. Remove the Front Frame Rail to install the Desk Drawer using the steps on the following pages.
- Page 7 2 Daily Desk Inside Base Screw Outside Base Screw Base Screw Using the 4mm Allen Key, unscrew the Base Screw (x1) from the center of the front facing Frame Rail. Next, unscrew and remove the outside Base Screw (x2) from the Rail Connector. Then loosen, but do not fully remove, the Inside Base Screw (x2) from the Rail Connector.
- Page 8 Desktop. Keep the rails stored after removal as to not lose any components. Branch Tip: If needed, apply light downward pressure on the end of the Frame Rail, directly above the Frame Rail Slot when sliding the Rail Connector.
- Page 9 Back Front Position the Desk Drawer to the Desktop so that the drawer opens towards the front of the desk. Align the mounting holes on the drawer onto the threaded holes in the Desktop. Tightly secure the Desk Drawer to the Desktop with the included Drawer Screws (x4) and 4mm...
- Page 10 V1.0-2025-02-24...
Need help?
Do you have a question about the Desk Drawer and is the answer not in the manual?
Questions and answers