Download Print this page

Advertisement

Quick Links

Conference Table
(8-10, 10-12)
Assembly Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the Conference Table 8-10 and is the answer not in the manual?

Questions and answers

Summary of Contents for Branch Conference Table 8-10

  • Page 1 Conference Table (8-10, 10-12) Assembly Guide...
  • Page 3 The new way of working you’ve been waiting for. Scan here for a digital copy of your assembly guide.
  • Page 4 Caution...
  • Page 5 Components Cable Door Table Tops Table Leg Frame Side Table Frame Screws Center Leg Table Top Screws Frame End...
  • Page 6 Carefully lay the Center Leg, Frame Side, and Frame End components upside-down on a large flat surface, making sure the attachment eyelets are facing down as shown. Remove the panels from the Center Leg to ease assembly. Connect the Frame Sides (x4) to the Center Leg (x1) and tightly secure with 8 Frame Screws (x2 screws per joint).
  • Page 7 Insert the Legs (x4) into the Frame Ends (x2) and secure tightly with the Frame Screws (x8). Using two friends, carefully flip the frame right-side up.
  • Page 8 Install the Cable Doors (x2) into the Table Top cutouts. Position the Table Tops (x2) on the Frame, aligning the Frame eyelets with the Table Top pilot holes. From underneath the table, tightly secure the Table Tops to the Frame with the Table Top Screws (x16). With the help from a friend, hold the Table Tops from above to prevent movement and maintain alignment.
  • Page 9: Optional Elements

    Optional Elements Table Power Optional: Tightly secure the Power Boxes to the bottom of the table tops using the included Screws (x16). Connect the power cord to the nearest outlet.
  • Page 10 Contact Have a question, comment, or suggestion? hello@branchfurniture.com branchfurniture.com...

This manual is also suitable for:

Conference table 10-12