Download Print this page
Fisher & Paykel 11 Series Installation Manual
Fisher & Paykel 11 Series Installation Manual

Fisher & Paykel 11 Series Installation Manual

Combination steam oven
Hide thumbs Also See for 11 Series:

Advertisement

Quick Links

COMBINATION STEAM OVEN
MINIMAL
OS60SMTDB1, OS60SMTDG1, OS60SMTNG1, OS60SMTNB1 models
CONTEMPORARY
OS60SDTDX2 models
INSTALLATION GUIDE
NZ AU UK IE

Advertisement

loading
Need help?

Need help?

Do you have a question about the 11 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Fisher & Paykel 11 Series

  • Page 1 COMBINATION STEAM OVEN MINIMAL OS60SMTDB1, OS60SMTDG1, OS60SMTNG1, OS60SMTNB1 models CONTEMPORARY OS60SDTDX2 models INSTALLATION GUIDE NZ AU UK IE...
  • Page 2 SAFETY AND WARNINGS WARNING! Electric Shock Hazard Failure to follow this advice may result in electric shock or death. • Before carrying out any work on the electrical section of the appliance, it must be disconnected from the mains electricity supply.
  • Page 3 SAFETY AND WARNINGS READ AND SAVE THIS GUIDE WARNING! To avoid hazard, follow these instructions carefully before installing or using this appliance. Please make this information available to the person installing the appliance—doing so could reduce your installation costs. This appliance must be installed and connected to the mains power supply only by a suitably qualified person according to these installation instructions and in compliance with any applicable local building and electricity regulations.
  • Page 4 PRIOR TO INSTALLATION Ensure that: the oven cavity is square and level based on the required dimensions the installation will comply with all clearance requirements and applicable standards and regulations the isolating switch will be easily accessible to the customer with the oven installed the electrician provides sufficient free length of power supply cable to reach from the bottom rear of the cavity to at least 1.5m in front of the bottom edge of the opening the cable may enter the cavity from the side, top or bottom, but top entry must be at...
  • Page 5 COMPONENTS REQUIRED TOOLS Supplied Powered driver Cross-head screwdriver STANDARD ACCESSORY KIT Part No. 580720 (Supplied with all models) Food probe Roast dish Full extension sliding shelf Grid Step down wire shelf Grill rack STEAM ACCESSORY KIT Part No. 580836 (Supplied with all models) Tray Large solid dish Large perforated dish...
  • Page 6 ACCESSING YOUR PRODUCT SPECIFICATIONS For full product, cabinetry and service specifications, refer to the Planning Guide. To access the Planning Guide, scan the QR code or visit fisherpaykel.com/specify. Search by appliance type, product name or model code. min. 580 min. 560 min.
  • Page 7 SERVICES This oven must be connected to the mains power supply only by a suitably qualified person. This oven must be earthed. Before connecting the oven to the mains power supply, check that: the domestic wiring system is suitable for the power drawn by the oven (as specified on the rating plate) the voltage corresponds to the value given on the rating plate.
  • Page 8 CHECK CAVITY 1. Measure cavity dimensions. Ensure all minimum specifications have been met. Refer to the planning guide for details. For dark cabinetry, ensure clashing has been considered and installed. fisherpaykel.com/specify 2. Ensure service access complies with local requirements. 3. Ensure any cooktop ventilation requirements have been considered.
  • Page 9 UNPACK PRODUCT Do not lift or move the product using the door handle. Keep all packing materials until the unit has been inspected. Inspect the product to ensure there is no shipping damage. If any damage is detected contact the dealer or retailer you brought the product from to report the damage.
  • Page 10 REMOVE DOOR 1. Open the door and remove all cable ties and packaging holding the oven shelves in place. 2. Grip the shelves at the front, making sure to hold the wire shelf and frame together. Lift upwards and pull out from the oven.
  • Page 11 REMOVE DOOR 4. Holding the door on both sides, partially close the door and carefully pull the door away from the hinges.
  • Page 12 CONNECT POWER 1. Unclip and lift cover to access terminal block. Live Neutral Connector Earth 2. Based on your terminal block configuration, connect wires as shown. Connector and ports may not be present on all models. Ensure oven is correctly Earthed and cable clamp is tightened before closing the cover.
  • Page 13 POSITION OVEN IN CAVITY 1. Some models only* For dark cabinetry, the supplied trim can be used to enhance clashing finish. To install, remove the trim adhesive and press to secure to cavity. 2. Ensure control panel is closed. Lift product into cavity taking care not to lift from the control panel.
  • Page 14 REFIT DOOR 1. Holding the door on both sides, carefully lift door back onto the hinges. 2. Open the door fully and push each locking lever down and lock into place. 3. Ensure both hinges are fully locked before shutting the door.
  • Page 15 ALIGN AND SECURE 1. Align oven with surrounding cabinetry and appliances. 2. Using the product as a guide, pre-drill 2 x 3mm pilot holes. 3. Secure oven to cavity using the 2 x screws provided.
  • Page 16 REFIT SHELVES Sliding shelves Place shelves back into the oven at the desired level. Ensure shelves are level and correctly positioned with the guard rail at the back. Wire shelves Slide shelves into the cavity. Clip on sliding shelf supports Ensure the slides are positioned the correct way around, with the triangular tab at the front.
  • Page 17 ALIGN AND SECURE 1. Follow the guidance on screen to ensure oven turns on and heats correctly. Refer to your User Guide for more information.
  • Page 18 INSTALLER CHECKLIST TO BE COMPLETED BY THE INSTALLER Ensure the oven is level and securely fitted to the cabinetry. Open the oven door slowly until it is fully open and check there is adequate clearance between the bottom of the door and the lower trim. This is to ensure correct air circulation.
  • Page 19 FISHERPAYKEL.COM © Fisher & Paykel Appliances 2024. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue.

This manual is also suitable for:

Minimal os60smtdb1Minimal os60smtdg1Minimal os60smtng1Minimal os60smtnb1Contemporary os60sdtdx2