Advertisement
Table of Contents
Contents
Goalzero BOULDER 100 Manual
GET TO KNOW YOUR GEAR
HOW IT WORKS
Plug the 8mm blue ringed cable into the INPUT port on the Goal Zero Yeti or Sherpa and angle the Boulder 100 Solar Panel toward the sun with the attached kickstand. You'll get the best solar charging experience if you continue to reposition the solar panel throughout the day.
HOW TO CHAIN
To chain Boulder 100 Solar Panels together, and for Boulder configurations over 150W, you'll need to purchase a combiner cable from Goal Zero.
To chain multiple Boulder 100 Solar Panels together, you'll need to purchase the 4x 8mm Anderson Conncetor Cable (SKU 98060) from Goal Zero.
TECHNICAL SPECIFICATIONS
| Boulder 100 Solar Panel | |
| Charge Times | |
| Goal Zero Yeti 500X | 6-12 hrs |
| Goal Zero Yeti 1000X | 12-24 hrs |
| Goal Zero Yeti 1500X | 18-36 hrs |
| Solar Panel | |
| Rated Power | 100W |
| Open Circuit Voltage | 18-23V |
| Cell Type | Monocrystalline |
| Ports | |
| Solar port (blue, 8mm male) | 14-23V, up to 7A (100W max) |
| General | |
| Weight | 20.1 lbs (9.1 kg) |
| Dimensions | 40.0 x 26.75 x 1.75 in (101.6 x 70.0 x 4.4 cm) |
| Warranty | 24 months |
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the BOULDER 100 and is the answer not in the manual?
Questions and answers