Load Standard/Optimized Defaults - JETWAY V266AR1A User Manual

This section is for setting CPU Frequency/Voltage Control.
CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
Auto Detect DIMM/PCI Clk
Spread Spectrum
** Current Host Clock is
Host Clock at Next Boot is 100MHz
** Current DRAM Clock is
DRAM Clock at next Boot is
CPU Vcore Select
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
¡ ü ¡ ý ¡ ú ¡ û
F5:Previous Values
Auto Detect DIMM/PCI Clk
This item allows you to enable/disable auto detect DIMM/PCI Clock.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
Host Clock at next Boot is
This item allows you to select CPU frequency step by step increasing
The choice are: 100MHz∼133MHz, 133MHz∼166MHz.
DRAM Clock at next Boot is
This field displays the capability of the memory modules that you can use
The choice is either 100MHz or 133MHz (only select CPU Frequency 100MHz.)
CPU Vcore Select
This item allows you to select Vcore of the CPU. The choice are: +16.25V∼+1.850V.

3-12 Load Standard/Optimized Defaults

Load Standard Defaults
Miscellaneous Control
Enabled
Disabled
Default
F6:Optimized Defaults
38
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults