Auto Detect PCI Clk
This item allows you to enable/disable auto detect PCI Clock.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
IRQ Resources
When resources are controlled manually, assign each system interrupt a type, depending on
the type of device using the interrupt.
Please refer to section 3-9-1
3-9-1 IRQ Resources
IRQ-3
assigned to
IRQ-4
assigned to
IRQ-5
assigned to
IRQ-7
assigned to
IRQ-9
assigned to
IRQ-10
assigned to
IRQ-11
assigned to
IRQ-12
assigned to
IRQ-14
assigned to
IRQ-15
assigned to
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
3-10 PC Health Status
This section shows the Status of you CPU, Fan, Warning for overall system status. This is
only available if there is Hardware Monitor onboard.
Show PC Health in Post
> Smart FAN Configurations
Vcore
VDIMM
+3.3
+5
+12
+3.3VUS
VBAT
+5VSUS
CPU Temperature
System Temperature
CPUFAN
SFAN1
SFAN2
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Show PC Health in Post
During Enabled, it displays information list below. The choice is either Enabled or Disabled
Phoenix – AwardBIOS CMOS Setup Utility
IRQ Resources
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
F6:Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
PC Health Status
Enabled
Press Enter
1.52V
2.50V
3.31V
4.96V
12.36V
3.26V
3.24V
5.12V
39 C/102 F
23 C/73 F
0 RPM
0 RPM
0 RPM
F6:Optimized Defaults
Menu Level >>
F7:Standard Defaults
Menu Level >
F7:Standard Defaults
33
Item Help
F1:General Help
Item Help
F1:General Help