JETWAY 939AGPR210 User Manual page 17

(3) PS/2 Mouse & PS/2 Keyboard Connector: PS2KBMS
The connectors for PS/2 keyboard and PS/2 Mouse.
(4) USB Port connector: USB0/USB1
The connectors are 4-pin connector that connect USB devices to the system board.
(5) LAN Port connector: UL1/USBLAN
This connector is standard RJ45 connector for Network
The UL1 support 10M/100Mb/s data transfer rate (for 939AGP-D/939AGP-P only)
The USBLAN support 10M/100M/1G b/s data transfer rate (for 939AGP-D/939AGP-G
only)
(6) Parallel Port Connector (25-pin female): PARALLEL
Parallel Port connector is a 25-pin D-Subminiature Receptacle connector. The On-
board Parallel Port can be disabled through the BIOS SETUP. Please refer to Chapter 3
"INTEGRATED PERIPHERALS SETUP" section for more detail information.
(7) Audio Line-In, Lin-Out, MIC, Surrback, Surround, CEN/LEF Connector : J1
This Connector are 6 phone Jack for LINE-OUT, LINE-IN, MIC, Surrback, Surround,
CEN/LEF
Line-out : (GREEN)
Line-in : (BLUE)
MIC : (PINK)
Surrback : (ORANGE)
CEN/LEF : (BLACKNESS) Audio output to speaker-Center/Subwoofer speaker out
Surround : (GRAY)
(8) Serial Port COM1/COM2 : COM1/COM2
COM1 is the 9-pin D-Subminiature male connector. The On-board serial port can be
disabled through BIOS SETUP. Please refer to Chapter 3 "INTEGRATED PERIPHERALS
SETUP" section for more detail information.
Audio output to speaker
Audio input to sound chip
Microphone Connector
Audio output to speaker-Rear speaker out
Audio output to speaker-Side speaker out
PS/2
Mouse
PRINT
PS/2
COM1
COM2
Keyboard
14
10/100M
LAN Giga LAN
USB1 USB
Surrback
Line-IN
CEN/LFE
Line-OUT
MIC-IN
Surround