Download
Share
Print this page
MSI S1102-01 User Manual
  1. Manuals
  2. Brands
  3. MSI Manuals
  4. Server
  5. S1102-01
  6. User manual
MSI S1102-01 User Manual

MSI S1102-01 User Manual

Hide thumbs Also See for S1102-01:

Advertisement

Quick Links

Download this manual
S1102-01
S1102-02
MS-S336
Server System
User Guide
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the S1102-01 and is the answer not in the manual?

Questions and answers

Related Manuals for MSI S1102-01

Summary of Contents for MSI S1102-01

  • Page 1 S1102-01 S1102-02 MS-S336 Server System User Guide...
  • Page 2 Contents Regulatory Notices ......................4 Safety Information ......................7 System Specifications ....................9 System Overview ......................11 S1102-01 ........................11 S1102-02 ........................12 Motherboard Block Diagram ..................15 System LED Indicators ....................16 Motherboard Overview ....................17 Motherboard Connectors .....................18 Storage Connectors ....................18 Expansion Slots......................20 Power Connectors ......................
  • Page 3 CPU & Cooler .........................36 Removing Preinstalled Liquid Cooling Module ............37 Installing CPU ......................38 Installing Liquid Cooling Module ................39 Installing Heatsink ...................... 40 Memory ..........................41 DIMMA1~2, DIMMB1~2: DDR5 DIMM Slots ..............41 Recommended Memory Population ................. 41 Installing Memory Modules ..................42 M.2 M Key ........................43 Installing M.2 M Key ....................
  • Page 4 Regulatory Notices WEEE Statement Under the European Union ( “EU” ) Directive on Waste Electrical and Electronic Equipment, Directive 2012/19/EU, products of “electrical and electronic equipment” cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life.
  • Page 5 Chemical Substances Information In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: https://csr.msi.com/global/index Battery Information Please take special precautions if this product comes with a battery.
  • Page 6 US. Copyright and Trademarks Notice Copyright © Micro-Star Int’ l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int’ l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners.
  • Page 7 Safety Information Please read and follow these safety instructions carefully before ⚠ installing, operating or performing maintenance on the server. General Safety Instructions ● Always read the safety instructions carefully. ● Keep this User Guide for future reference. ● Keep this equipment away from humidity. ●...
  • Page 8 Assembly and Installation This equipment must be installed in restricted access areas by qualified personnel to comply with safety standards set by the NEC and IEC 62368-1, Third Edition, for Information Technology Equipment. Lifting and Placement ● WARNING: This server is heavy. ●...
  • Page 9 System Specifications S1102-01 S1102-02 SKUs Form factor 438.5mm(17.26” ) W x 43.5mm(1.71” )H x 438.5mm(17.26” ) W x 43.5mm(1.71” )H x Dimensions 547.6mm(21.56” )D 660mm(26” )D Single AMD Ryzen™ 7000/9000 Series and Single AMD Ryzen™ 7000/9000 Series and Processor EPYC™ 4004/4005 Series Processor, EPYC™...
  • Page 10 S1102-01 S1102-02 SKUs 1 x TPM header (with SPI interface) Security ● TPM 2.0 ● 1 x 1GbE RJ45 port for Mgmt. (Realtek® RTL8211FD-CG) Server ● ASPEED AST2600 with AMI MegaRAC based firmware Management - Supports IPMI 2.0 and DMTF Redfish® API ●...
  • Page 11 System Overview S1102-01 4 x 2.5/ 3.5” SATA 3.0 Hot-Swap Drive Bays...
  • Page 12 S1102-02 4 x 2.5/ 3.5” SATA 3.0 Hot-Swap Drive Bays...
  • Page 13 UID Button The UID (Unit Identification) button help users identify and locate a system, especially in high-density rack environments. UID LED USB 3.2 Gen 1 Type-A Port This connector is provided for USB peripheral devices. (Speed up to 5 Gbps) System Status LED HDD Activity LED Power LED...
  • Page 14 GbE RJ45 LAN port (Mgmt.) The standard RJ45 LAN jack is provided for connection to the Local Area Network (LAN). You can connect a network cable to it. Status Description No link Link/ Activity Green Linked LINK/ACT SPEED Blinking Data activity 10 Mbps Speed LED Orange...
  • Page 15 Motherboard Block Diagram 4 x SATA Ports 2 x DIMM Slots SATA 3.0 (x4) DDR5 Channel A P4-7 (rear, W/ 1 x VCC) DIMMA1 SATA1~4 DIMMA2 AMD EPYC™ 4004/4005 SATA Controller AMD Ryzen™ 7000/9000 PCIe (x1) ASM1061 2 x DIMM Slots DDR5 Channel B Socket AM5 SATA 2.0...
  • Page 16 System LED Indicators Power System Alarm LED Button Button LAN1 Activity LED* UID LED LAN2 Activity LED* Power LED HDD Activity LED LED State Description System power is on Blue System power is on ACPI S0 state Blinking System is sleeping Power LED System power is off System power is on ACPI S4, S5 state...
  • Page 17 Motherboard Overview Flash BAT1 BIOS Flash...
  • Page 18 Motherboard Connectors Storage Connectors SATA1~4: SATA 3.0 6Gb/s Ports These connectors are SATA 6Gb/s interface ports, it can connect to SATA devices. SATA3_1: SATA 2.0 3Gb/s Ports These connectors are SATA 3Gb/s interface ports, it can connect to SATA devices. SATA4 SATA3 SATA2...
  • Page 19 M2_1~2: M.2 Slots (M Key, PCIe 4.0, 22110/ 2280) The M.2 slot supports solid-state drive (SSD). For Installation procedure, please refer to “System Setup > M.2 M Key” . M2_1* M2_2 *M2_1: The M2_1 and PCIE_4 slots cannot operate simultaneously. You can use the JSEL_M1 jumper select which one to enable.
  • Page 20 Expansion Slots PCIE_4*: PCIe 4.0 x 8 slot (Gen 4 x 4 signal from CPU) PCIE_16: PCIe 5.0 x 16 slot (Gen 5 x 16 signal from CPU) *PCIE_4: The PCIE_4 and M2_1 slots cannot operate simultaneously. You can use the JSEL_M1 jumper to select which one to enable.
  • Page 21 Power Connectors JPWR1 JPWR2 JSDOMPWR1 JPWR2: 24-pin Main Power Connector This connector allows you to connect an ATX power supply. +3.3V +3.3V +3.3V -12V PS-ON# JPWR2 PWR OK 5VSB +12V +12V +3.3V...
  • Page 22 JPWR1: 8-Pin 12V Power Connector This connector allows you to connect an ATX power supply. P12V P12V JPWR1 P12V P12V JSDOMPWR1: 2-pin SATA DOM Power Connector This connector is used to provide power to SATA DOM devices. JSDOMPWR1 Important ⚠ Make sure that all power connectors are securely connected to the power supply to ensure stable operation of the motherboard.
  • Page 23 Cooling Connectors FAN1 FAN2 FAN3 FAN4 FAN5 FAN6 FAN7 FAN8 2 3 4 PUMP1 FAN1~8, PUMP1: Fan Connectors The fan connector supports system cooling fans with +12V. When connecting the wire to the connectors, always note that the red wire is the positive and should be connected to the +12V;...
  • Page 24 USB Connectors JUSB1: USB 3.2 Gen 1 Header This header is backward-compatible with USB 2.0 devices and supports data transfer rate up to 5 Gbps. USB_VCC1 USB2_ESD_DP9 USB3_ESD_RX4N USB2_ESD_DN9 USB3_ESD_RX4P USB3_ESD_TX5P USB3_ESD_TX4N USB3_ESD_TX5N JUSB1 USB3_ESD_TX4P USB3_ESD_RX5P USB2_ESD_DN8 USB3_ESD_RX5N USB2_ESD_DP8 USB_VCC2 No pin JUSB2: USB 3.2 Gen 1 Type-A Port JUSB2...
  • Page 25 Other Connectors and Components JFP1: Front Panel Header The front panel header is provided for electrical connection to the front panel switches and LEDs. PWR_LED+ FP_PWR SYS_ID_LED+ PWR_LED- SYS_ID_LED- HDD_ACT_LED+ SYS_FAULT_LED1- HDD_ACT_LED- SYS_FAULT_LED2- JFP1 PWR_BTN NIC#1_ACT_LED+ PWR_BTN_GND NIC#1_ACT_LED- RST_BTN SMB_SDA RST_BTN_GND SMB_SCL SYS_ID_BTN...
  • Page 26 JTPM1: SPI TPM Header This header connects to a TPM (Trusted Platform Module) (optional). Please refer to the TPM security platform manual for more details. SPI_LOC_ROM_CS_N CPU_RSMEST_L PVDD_P1V8_AUX SPI_LOC_ROM_CLK SPI_CPU0_WP_L JTPM1 SPI_CPU0_HOLD_L SPI_LOC_ROM_MISO SPI_LOC_ROM_MOSI CPU_SPI_TPM_CS_N PVDD_P1V8_AUX CPU_TPM_SPI_IRQ_N PVDD_P1V8_AUX TPM_RESET_N PVDD_P1V8_AUX JTPM1...
  • Page 27 JGPIO1: GPIO Header This header is provided for the General-Purpose Input/Output (GPIO) peripheral module. USER_GPIO0 USER_GPIO1 USER_GPIO2 USER_GPIO3 JGPIO1 USER_GPIO4 USER_GPIO5 USER_GPIO6 USER_GPIO7 No pin JPMBUS1: PMBus Header Power Management Bus (PMBus) is a variant of the System Management Bus (SMBus) which is targeted at digital management of power supplies.
  • Page 28 FP_I2C_1, RBP_I2C_1~2: I2C Headers I2C headers connect to the System Management Bus (SMBus). FBP_I2C_1 is for the front HDD backplane, RBP_I2C_1 is for the rear HDD backplane, and RBP_I2C_2 is for the MSI liquid module leakage sensor solution (S1102-02). FP_I2C_1 I2C_CLK...
  • Page 29 JCHASSIS: Chassis Intrusion Header This header connects to the chassis intrusion switch cable. If the chassis is opened, the chassis intrusion mechanism will be activated. The system will record this status and show a warning message on the screen. To clear the warning, you must enter the BIOS utility and clear the record.
  • Page 30 BAT1: CMOS Battery If the CMOS battery is out of charge, the time in the BIOS will be reset and the data of system configuration will be lost. In this case, you need to replace the CMOS battery. Replacing CMOS battery 1.
  • Page 31 Motherboard Jumpers Important ⚠ Avoid adjusting jumpers when the system is on; it will damage the motherboard. JSEL_M1 JSEL_BMC1 PWRTEST1 JRTC_CLR1 Jumper Name Default Setting Description 1-2: M.2_1 enabled, PCIE_4 disabled (Default) JSEL_M1 2-3: PCIE_4 enabled, M.2_1 disabled 1-2: Using CPU (Default) JSEL_BMC1 2-3: Using BMC 1-2: Normal (Default)
  • Page 32 Motherboard LEDs BMC_LED1: BMC Heartbeat LED This LED indicates the BMC (Baseboard Management Controller) status. Status Description BMC is not activated BMC is functioning normally Blinking LED_H1, LED_L1: Port 80 Debug LEDs The Port 80 Debug LEDs display progress and error codes during and after POST (Power-On Self Test).
  • Page 33 Getting Started Important ⚠ All information is subject to change without prior notice. ● The system illustrations are provided for demonstration purposes only. The ● appearance and internal view of your system may vary depending on the model you purchased. Necessary Tools Screwdriver Pliers...
  • Page 34 System Setup Important ⚠ Before removing or installing any components, make sure the system is not turned on or connected to the power. Drive Bay Installing 3.5"/2.5" Storage Drive 1. Engage two embossed pins on the carrier into the side dimples on the 3.5” drive. For 2.5”...
  • Page 35 System Cover Removing System Cover 1. Loosen and remove the screws securing the system on both sides and the top. Screws securing the rear top cover on both sides are only present in the S1102-02 ● SKU. 2. Press down on the release latches on both sides of the rear top cover, then slide it towards the back of the system to remove it.
  • Page 36 CPU & Cooler Use appropriate ground straps, gloves and ESD mats to protect yourself from electrostatic discharge (ESD) while installing the processor. Important ⚠ Overheating will seriously damage the CPU and system. Always make sure the ● cooling fan can work properly to protect the CPU from overheating. Make sure that you apply an even layer of thermal paste (or thermal tape) between the CPU and the cooler to enhance heat dissipation.
  • Page 37 Removing Preinstalled Liquid Cooling Module If your system comes with a preinstalled liquid cooling module, follow the instructions to remove it before proceeding with the CPU installation. Follow the instruction below: Remove all screws in diagonal sequence with a torque screwdriver. Torque: 5.5-6.1 kgf·cm* *5.5-6.1 kgf·cm...
  • Page 38 Installing CPU Follow the steps below to install CPU:...
  • Page 39 Installing Liquid Cooling Module Follow the steps below to install liquid cooling module: Torque: 5.5-6.1 kgf·cm* *5.5-6.1 kgf·cm = 0.54~0.6 N·m = 4.77~5.29 lbf·in...
  • Page 40 Installing Heatsink Follow the instruction below to install heatsink:...
  • Page 41 Memory DIMMA1~2, DIMMB1~2: DDR5 DIMM Slots DIMMA1 DIMMB1 Channel A Channel B DIMMA2 DIMMB2 Recommended Memory Population Quantity of DIMMs DIMMA1 Channel A DIMMA2 DIMMB1 Channel B DIMMB2 ** “ V” indicates a populated DIMM slot. ** Important ⚠ Only support UDIMM. ●...
  • Page 42 Installing Memory Modules 1. Open the side clips to unlock the DIMM slot. 2. Insert the DIMM vertically into the slot, ensuring that the off-center notch at the bottom aligns with the slot. 3. Push the DIMM firmly into the slot until it clicks and the side clips automatically close.
  • Page 43 M.2 M Key Installing M.2 M Key Video Demonstration ⚽ Watch the video to learn how to Install M.2 SSD. 1. Loosen the M.2 riser screw from the motherboard. 2. Move and fasten the M.2 riser screw to the appropriate location according your M.2 SSD size.
  • Page 44 Air Duct Installing Air Duct Important ⚠ The air duct is only for SKU with heatsink. Follow the steps below to install air duct: 1. Remove the riser card assembly. 2. Flip the air duct over and remove the polystyrene cube.
  • Page 45 3. Install the air duct. 4. Reinstall the riser card assembly back into the chassis.
  • Page 46 Slide Rail Important ⚠ The pre-installed screws on the outer rail bracket are intended only for square rack holes. For round holes, please switch to the “7.1 round hole screw” . 9.5 Square Hole Screw (pre-installed) 7.1 Round Hole Screw Disassembling Slide Rail Slide the release tab forward to separate the inner rail from the bracket.
  • Page 47 Installing Inner Rail to System 1. Align the standoffs on the side of the system with the hole on the inner rail, then pull the inner rail backwards till it locks into place. 2. Tighten the screw to secure the inner rail. 3.
  • Page 48 Retracting Outer Rail Bracket Pull the latch downward to slide the middle rail back to the outer rail bracket. Middle Rail Attaching Outer Rail Bracket to Rack Frame...
  • Page 49 Installing System into Rack 1. Pull out the middle rails till it fully extended. 2. Engage the inner rails of the system to the middle rails, then push the system forward until it stops. 3. Push the system into the rack by sliding the two-way release tabs forward or backward.
  • Page 50 Detaching Outer Rail Bracket from Rack Frame Detaching Inner Rail from System...
  • Page 51 MSI.COM EPS.MSI.COM...

This manual is also suitable for:

S1102-02Ms-s336