Install Microwave Oven; Complete Installation - KitchenAid KBHS109SSS - 30 in. 1.4 cu. Ft. Microwave Oven Installation Instructions Manual

1. Check that all parts are now installed. If there is an extra part,
go back through the steps to see which step was skipped.
2. Check that you have all of your tools.
3. Dispose of/recycle all packaging materials.
4. For microwave oven use and cleaning, read the Use and Care
Guide.
Check Operation of Microwave Oven
1. Turn power on.
2. When "CLOCK ENTER TIME" appears in the display, press
START/ADD A MINUTE.
3. Fill a microwave-safe container with 1 cup (250 mL) of water
and place container inside microwave oven on the turntable.
Close door firmly.
4. Touch START/ADD A MINUTE twice to set cooking time to
"2:00" minutes. Microwave should begin cooking, interior
light should be on, and the display should count down the
remaining time.

Complete Installation

If microwave does not operate, check the following:
Household fuse is intact and tight; or circuit breaker has
not tripped.
Electrical supply is connected;
See "Troubleshooting" section in the Use and Care Guide.
If an error code ("F" followed by a number plus "E"
followed by a number) appears in the display, turn off the
microwave oven and contact a qualified technician.
5. When the display reads "1:00" minute, open the microwave
oven door. The microwave should stop cooking. Close door
firmly. The interior microwave oven light should turn off.
6. Press START/ADD A MINUTE to resume preset cycle.
Microwave should begin cooking, and the microwave oven
interior light should be on.
Let microwave oven complete cooking time. A tone will
sound 3 times at the end of the cooking time.
7. Open microwave oven door and slowly remove container.
Water in container should be hot.
If you need Assistance or Service:
Please reference the "Assistance or Service" section of the Use
and Care Guide or contact the dealer from whom you purchased
your built-in microwave oven.
7