Discs-Basic Play; The Source - Panasonic SC-HT700 Operating Instructions Manual

Discs—Basic play
TUNING
S.M PROGRESSIVE SELECTOR
V.R.S M.R.S
PROGRESSIVE
Í
DISC
SEQUENTIAL
SEQUENTIAL
PLAY MODE
∫
TOP MENU
TOP MENU
NAVIGATOR
342 1
ENTER
TV VOL s
%
SUBWOOFER
P.MEMORY
[RAM] [DVD-A] [DVD-V] [VCD]
Preparation
≥Press [Í] to turn on the unit.
≥Turn on the television and select the appropriate video input on the
television to suit the connections for the unit.
[1]
Press [DVD/CD] to select "DVD/CD" as

the source.

To enjoy progressive video
Press [PROGRESSIVE].
The television will be disrupted for a
moment but this is normal.
≥Output from this unit is interlace if you have connected to the
television through the VIDEO OUT, S-VIDEO OUT or SCART
(AV) terminal or playing PAL discs, even if "PROG." is on the
display.
[2]
Press [<] to open the drawer and
place the disc(s) on the disc tray(s).
To load discs on the other trays, press [DISC SKIP] on the
main unit.
RQT6756
14
%
@ $ @
∫ ;
DOWN
TUNE MODE FM MODE MEMORY
DISC 1 2 3 4 5
Disc indicators DISC SKIP
DISC EXCHANGE
AV SYSTEM TV VCR
!
DIGITAL
TV/AV AUX TUNER/BAND DVD/CD
DISC
1 2 3
DISC 1
DISC 1 DISC 2 DISC 3
PAGE
GROUP
DISC 5
4 5 6
DISC 4 DISC 5
Numbered
7 8 9
buttons
REPEAT FL DISPLAY
CANCEL
S10/-/--
0
SKIP SLOW/SEARCH
$
CH
;
MENU
MENU
DIRECT PLAY LIST
ENTER
DISPLAY RETURN
RETURN
TV VOL r
VOLUME
S.POSITION C.FOCUS MIX 2CH
LEVEL SFC S.SRND PL
SLEEP AV EFFECT ZOOM SETUP
C.S.M P.MEMORY AUDIO MUTING
SUBTITLE
TEST DR COMP DELAY TIME
SHIFT
CH SELECT QUICK REPLAY SUBTITLE
QUICK REPLAY
[CD] [WMA] [MP3] [JPEG]
PROG.
If the disc contains both audio data (WMA and MP3) and
JPEG, check "Mixed Disc—Audio & Stills" setting in the
SETUP menu (➡ page 33). Select "Stills (JPEG)" or "Audio
#
,
(MP3/WMA)".
≥Remove TYPE 2 and 4 discs
from their cartridges before use.
VOLUME
OPEN/CLOSE
[RAM]
UP
≥Label-up (With double-sided
DISC EXCHANGE DISC SKIP
discs, load so the label for the
side you want to play is facing
up.)
[3]
Press [<] to close the drawer.
The disc indicator lights red to show the disc in the play
position is selected.
[4]
Press [1] (play).
Play begins.
[WMA] [MP3] [CD] (CD text only)
Group and track names are displayed on the television.
≥Press [SUBTITLE] to turn the display on or off.
≥You can also use the navigation menus to control play
(➡ page 22).
[5]
Adjust the volume.
– – dB
(Minimum) (Maximum)
∫ To pause play
Press [;] during play.
Press [1] (play) to restart play.
∫ To stop play
Press [∫] (➡ page 15, Resume function).
∫ To select a disc
Press [DISC] and then the disc button ([DISC 1]–[DISC 5]).
∫ To prevent damage
Do not;
≥load more than one disc per tray.
≥touch the drawer or the carousel while they are in motion.
≥rotate the carousel by hand.
≥close the drawer by hand.
[Note]
≥If "$" appears on the television
The operation is prohibited by the unit or disc.
≥It may take some time for play to start but this is normal.
When a menu appears on the television
[DVD-A] [DVD-V]
Press the numbered buttons to select an
item.
To select a 2-digit number
Example: To select item 23, press [S10] ➡ [2] ➡ [3].
≥When playing DVDs, you can also use [3, 4, 2, 1] to select
items. Press [ENTER] to confirm your selection.
To return to the menu screen
[DVD-A] [DVD-V] [TOP MENU]: Shows the first menu screen.
[DVD-V] [MENU]: Shows the menu screen.
[VCD]
[RETURN]: Shows the menu screen.
[Note]
The disc continues to rotate while the menu is displayed even after
you finish playing an item. Press [∫] when you finish to preserve the
unit's motor and your television screen.
Play starts from the disc in
the front-left position.
0 dB
[VCD]