Sanyo HEC-DR6700K - Zero Gravity Massage Chair Instruction Manual page 13

Massage lounger
Hide thumbs

Advertisement

MASSAGING (MANUAL COURSES)
Kinds of massages and adjustments of massaging rollers
Several types of desired massage can be selected.
It is possible to adjust the movement speed, height position and width of massaging rollers and the strength of massage.
(There are some adjustments that are not possible, depending on the kind of massaging. Refer to the table below.)
Åq Individual massagesÅr
Kinds of massage
Operation
Massaging by grasping the shoulders.
Shiatsu massaging.
Kneading.
Tapping.
Combined tapping and kneading actions.
Spinal stretch along the entire length of back.
Spinal stretch along an 8" region of back.
Spinal stretch along a 4" region of back.
Åq Combined massagesÅr
Massaging by spine stretching,
Å{
while executing shiatsu operation.
Massaging by partial stretching (long),
Å{
while executing shiatsu operation.
Massaging by partial stretching (short),
Å{
while executing shiatsu operation.
Massaging by spine stretching,
Å{
while executing kneading operation.
Massaging by partial stretching (long),
Å{
while executing kneading operation.
Massaging by partial stretching (short),
Å{
while executing kneading operation.
Massaging by spine stretching,
Å{
while executing tapping operation.
Massaging by partial stretching (long),
Å{
while executing tapping operation.
Massaging by partial stretching (short),
Å{
while executing tapping operation.
Massaging by spine stretching, while
Å{
executing tapping and kneading operation.
Massaging by partial stretching (long), while
Å{
executing tapping and kneading operation.
Massaging by partial stretching (short), while
Å{
executing tapping and kneading operation.
23
Adjustment of massaging rollers
Height, speed and strength
are adjustable.
Height, speed, width and
strength are adjustable.
Height, speed and strength
are adjustable.
Height, speed, width and
strength are adjustable.
Height, speed and strength
are adjustable.
Height, width and strength
are adjustable.
Height, width and strength
are adjustable.
Height, width and strength
are adjustable.
Height, speed, width and
strength are adjustable.
Height, speed, width and
strength are adjustable.
Height, speed, width and
strength are adjustable.
Height, speed and strength
are adjustable.
Height, speed and strength
are adjustable.
Height, speed and strength
are adjustable.
Height, speed, width and
strength are adjustable.
Height, speed, width and
strength are adjustable.
Height, speed, width and
strength are adjustable.
Height, speed and strength
are adjustable.
Height, speed and strength
are adjustable.
Height, speed and strength
are adjustable.
Massaging of lower body
Simultaneous massaging of any part of "upper body" and "lower body (air)" is possible.
Independent massaging of "upper body" and "lower body (air)" is possible.
1 to 5 are the same operation for massaging the upper body. When massaging the upper body, start from operation 6.
1
Press the OPERATION ON/OFF button.
When the button is pressed, the lamp of the remote control illuminates and the sole warmer will turn on.
When the foot rest is fully lowered, the foot rest will rise a little.
When the massaging rollers are not located in the upper section, the massaging rollers will move to the upper
section and stop. (During the movement, the characters of "ORIGIN" on the remote control flicker.)
2
Turn the sole warmer on or off.
Sole warmer will be turned on or off each time the SOLE WARMER button is pressed.
(The button is illuminated while the sole warmer is on.)
If you feel that the sole warmer is too hot, turn it off by pressing the SOLE WARMER button.
Åñ
When the room temperature
is low such as in winter,
it takes some time to
warm up or you may
barely feel warm.
3
Adjust the positions of
the back rest and the
foot rest.
(See page 13-15)
4
Open the cover of the
remote control.
5
Press the MANUAL button.
6
Press the MANUAL (CALF/FOOT) MASSAGE button.
During massaging operation, you can change to a different manual massage,
Whole Body Sensor Automatic Course, or Automatic Course.
7
By pressing the LOWER BODY strength adjustment button,
adjust the strength of massage.
The strength of massage will change each time the button is pressed,
and is indicated by the lamp on the remote control.
Finishes the massaging automatically by timer operation.
Å°
It will stop automatically approx. 15 minutes after starting the operation.
The buzzer sounds, and the display part of the remote control turns off.
To stop the massage during massaging operation.
Press the OPERATION ON/OFF button.
All the massaging will stop and the chair will be
automatically brought to its home position.
Press the button for the current operation.
The massaging that corresponds to the pressed
button will stop.
CALF/FOOT
Air massage of the
legs and soles of
the feet.
If you have felt abnormal physical sensation or want to stop the massager immediately
Press the INSTANT STOP button.
All the massaging will stop and the lamp of the remote control will
turn off.
When you want to restart massaging, press the OPERATION ON/OFF
button and repeat the operation from the beginning of each massage.
24

Hide quick links:

Advertisement

loading

  Also See for Sanyo HEC-DR6700K - Zero Gravity Massage Chair

  Related Manuals for Sanyo HEC-DR6700K - Zero Gravity Massage Chair

Table of Contents