Onkyo HT-S6500 Instruction Manual page 65

■
There's no video
Make sure that your iPod/iPhone model's TV OUT
setting is set to On.
Make sure the correct input is selected on your TV or
the AV receiver.
Some versions of the iPod/iPhone do not output
video.
■
The AV receiver's remote controller doesn't
control my iPod/iPhone
Make sure your iPod/iPhone is properly inserted in
the Dock. If your iPod/iPhone is in a case, it may not
connect properly to the Dock. Always remove your
iPod/iPhone from the case before inserting it into the
Dock.
The iPod/iPhone cannot be operated while it's
displaying the Apple logo.
Make sure you've selected the right remote mode.
When you use the AV receiver's remote controller,
point it toward your AV receiver.
If you still can't control your iPod/iPhone, start
playback by pressing your iPod/iPhone model's Play
button. Remote operation should then be possible.
Try resetting your iPod/iPhone.
Depending on your iPod/iPhone, some buttons may
not work as expected.
■
The AV receiver unexpectedly selects my
iPod/iPhone as the input source
Always pause iPod/iPhone playback before selecting
a different input source. If playback is not paused, the
Direct Change function may select your iPod/iPhone
as the input source by mistake during the transition
between tracks.
■
iPod/iPhone doesn't work properly
Try reconnecting your iPod/iPhone.
Zone 2
—
■
There's no sound
—
Only components connected to analog inputs can be
played in Zone 2.
—
Music Server and Internet Radio
■
Can't access the server or Internet radio
Check the network connection between the AV
—
receiver and your router or switch.
Make sure that your modem and router are properly
connected, and make sure they are both turned on.
Make sure the server is up and running and
compatible with the AV receiver.
—
Check "Network Setup".
57
■
Playback stops while listening to music files on
—
the server
Make sure your server is compatible with the AV
—
receiver.
If you download or copy large files on your
— computer, playback may be interrupted. Try closing
any unused programs, use a more powerful computer,
—
or use a dedicated server.
If the server is serving large music files to several
networked devices simultaneously, the network may
become overloaded and playback may be interrupted.
Reduce the number of playback devices on the
network, upgrade your network, or use a switch
—
instead of a hub.
■
Can't connect to the AV receiver from a Web
browser
If you're using DHCP, your router may not always
allocate the same IP address to the AV receiver, so if
— you find that you can't connect to a server or Internet
radio station, recheck the AV receiver's IP address on
the "Network Setup" screen.
Check "Network Setup".
En-65
USB Device Playback
■
Can't access the music files on a USB device
— Make sure the USB device is plugged in properly.
The AV receiver supports USB devices that support
the USB mass storage device class. However,
playback may not be possible with some USB devices
even if they conform to the USB mass storage device
class.
USB memory devices with security functions cannot
75
be played.
—
Others
76
■
Standby power consumption
In the following cases, the power consumption in
53
standby mode may reach up to a maximum of 4.2 W:
– The "HDMI Ctrl (RIHD)" setting is set to "On".
(Depending on the TV status, the AV receiver will
enter standby mode as usual.)
– The "HDMI Through" setting is set to other than
76
"Off".
– The "Network Standby" setting is set to "On".
—
■
The sound changes when I connect my
headphones
—
When a pair of headphones is connected, the listening
mode is set to Stereo, unless it's already set to Stereo,
Mono, Direct, or Pure Audio (European and
Australian models).
■
The speaker distance cannot be set as required
The values entered may be automatically adjusted
with values best-suited for your home theater.
54
■
The display doesn't work
The display is turned off when the Pure Audio
(European and Australian models) listening mode
is selected.
53
Appendix
—
76
—
52, 54
—
—
—