Connecting To An External Amplifier; Setting The Digital Output; Dvd Setup; Dvd Setup Operation - Alpine 9861 - DVA - DVD Player Owner's Manual

Connecting to an External Amplifier

POWER IC ON (Initial setting) / POWER IC OFF
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
POWER IC OFF : Use this mode when the front and rear pre-
amplifier of the unit are used to drive an
external amplifier connected to the speakers.
In this setting, the head unit's internal amplifier
has no output to drive speakers.
POWER IC ON : The speakers are driven by the built-in
amplifier.
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
• No sound is produced by the system when the power output is set to
OFF.
• If an external amplifier only for the subwoofer is connected, set to
ON.

Setting the Digital Output

OPT OUT ON / OPT OUT OFF (Initial setting)
To connect to a digitally to an audio processor, the optical digital output
must be turned ON.
• If DVD Audio is used, sound is output via Ai-NET regardless of this
setting.
26
-EN
Front
left
Amplifier
Front
right
Rear
left
Amplifier
Rear
right
Speakers
Front
right
Rear
right
Rear
left
Front
left

DVD Setup

RETURN
CLR
SETUP

DVD Setup Operation

• DVD Setup Operation is performed by the remote control unit.
The following 4 steps are common to each of the DVD settings.
Refer to the specific section for details.
1
Press SETUP before inserting a disc, or when in
stop mode.
The setup menu appears on the monitor.
S E T UP
L A N G U A G E S
T V S C R E E N
1 6 9 W I D E
O F F
P A R E N T A L
A U D I O S E T U P
C U S T O M S E T U P
2
Press or to select your desired setting item,
then press ENT.
Further items will be displayed.
Setting items:
LANGUAGES / TV SCREEN / PARENTAL / AUDIO SETUP*
2
CUSTOM SETUP*
1
* Refer to "Audio Setup" on page 29.
2
* Refer to "Custom Setup" on page 31.
3
Press , , or
press ENT.
ENT.
Numeric
keypad
(0 to 9)
E N
to change the setting, then
1
/