Setting The External Audio Processor; Remote Sensor Setting - Alpine X209D Quick Reference Manual

Rear Seat Entertainment Setup
[Rear Seat Entertainment] is selected on the System Setup Menu screen
in step 1. See "System Setup" (page 46).
When a Rear monitor equipped with HDMI input is connected to this
unit, change this setting to "On. " You can output images to the Rear
monitor. For details, see "Rear Seat Entertainment Function" (page 21).
Setting item:
Rear Seat Entertainment
Setting contents:
Off (Initial setting) / On
Setting the Rear Seat Entertainment System
Make sure the Rear Seat Entertainment is set to "On" (
Seat Entertainment Setup" (page 50).
Setting item:
Plasmacluster/Illumination Color
Setting contents:
Off (Initial setting) / On
• For details on adjusting Plasmacluster/Illumination, see "Rear Seat
Entertainment Function" (page 21).
• When the Rear Seat Entertainment setting is set to "Off, " you cannot
select this item.
• Set the coordination color and Plasmacluster controls on the Rear
monitor to "Navi. " When set to "Rear monitor, " you cannot operate
them from this unit.

Remote Sensor Setting

Make sure the Rear Seat Entertainment is set to "On" (
Seat Entertainment Setup" (page 50).
For remote control operation, the remote sensor of the external device
(Rear monitor, etc.) can be switched, as you prefer.
Setting item:
Remote Sensor
Setting contents:
Front (Initial setting) / Rear
Front: The remote sensor of this unit is effective.
Rear: The remote sensor of Rear monitor is effective.
• You can also control this setting from the Rear Seat Entertainment
System Setup screen. For details, see "Rear Seat Entertainment
Function" (page 21).
50
-EN
External Accessories Setup
[External Accessories] is selected on the System Setup Menu screen in
step 1. See "System Setup" (page 46).

Setting the External Audio Processor

When using an external audio processor, set to "On" (
Setting item:
External Audio Processor
Setting contents:
Off (Initial setting) / On
). See "Rear
• When this setting is "On, " the Volume level is fixed at 10. Also, Balance/
Fader/Subwoofer Level/Subwoofer Phase/Bass/Treble/MX HD/EQ
Presets/Dual HD EQ/X-Over/Time Correction/Defeat/Phone Speaker/
Default Sound Settings are set to "Off " or "Flat" and cannot be
adjusted.
• Use the External Audio Processor to adjust volume.
Setting the HDMI Selector On/Off
If you connect an HDMI selector, you can connect two HDMI devices.
When using an HDMI selector, set to "On" (
Setting item:
HDMI selector
Setting contents:
Off (Initial setting) / On
• For details on switching the HDMI source when two HDMI devices are
). See "Rear
connected, see "HDMI Operation" (page 80).
Setting the External Accessory Control
When you have connected the optional External Accessory Control
module, set this setting to "On" to turn the headlights ON/OFF or adjust
the air suspension from this unit.
Setting item:
External Accessory Ctrl
Setting contents:
Off (Initial setting) / On
• When set to "On, " the [Ext Acc Ctrl] icon is displayed on the Menu
screen.
• For details on the External Accessory screen and its operation, see
"External Accessory Control Operation" (page 97).
).
).