Setup Guide
Check the included items
1
Remove the protective material
2
Install Software
IMPORTANT
Do not connect the scanner to the computer
before installing the software.
Troubleshooting Wi-Fi Setup
• Are the SSID and the password entered correctly? The SSID and the
password are case sensitive.
• The scanner can only connect to a network that supports 2.4 GHz
connections. Make sure the access point that is currently connected
supports 2.4 GHz band, or the scanner is connected to the network at 2.4
GHz band.
6T3-0117-01
1
Download the software.
2
Execute the downloaded software and follow the on-screen instructions.
XXXXXXXX
https://software.canon-elec.co.jp/ims/r50/
• Connect the scanner to the same network as the computer and the access
point are connected.
• Turn both this scanner and the access point off and back on, and attempt
the Wi-Fi connection again.
• When an access point's stealth function is enabled, it cannot be detected
during Wi-Fi setup. Disable the stealth function or use manual setup to
enter the correct SSID of the access point.
© CANON ELECTRONICS INC. 2020
Setup Disc is not included.
PRINTED IN JAPAN
Need help?
Do you have a question about the R50 and is the answer not in the manual?
Questions and answers