Related Manuals for Magicard RIO 2
Summary of Contents for Magicard RIO 2
- Page 1 ® QUICKSTART GUIDE Free 2 year warranty in North America and EU only standard standard option option option option Tango 2 option only pending...
-
Page 2: Printer Location Requirements
- allowance for air circulation. 1. Open a new roll of dye film. Rio 2 or Tango 2. You can purchase a Cleaning Kit (Magicard part no. Normally, the Printer Properties panel will be all you need to set. Press down on the top cover, operate the top cover release 2. -
Page 3: Install The Dye Film
Caution: Check the label on the rear panel to make sure that inserting the roller shaft into the U shaped CAUTION - The use of non Ultra Magicard approved dye film ead life. may degrade images and could shorten the printhead life. - Page 4 Finally replace the cleaning cassette by 2. Tilt the loaded hopper back as shown, and lower gently into CAUTION - The use of non Ultra Magicard approv the receptacle at the rear of the printer.You will be able to inserting the roller shaft into the U shaped may degrade images and could shorten the printhe lower the hopper about an inch (25mm).
- Page 5 Plug the power supply lead provided into the socket on the rear panel of your printer, and the other end into a properly grounded electrical outlet. Rio 2 and Tango 2 QuickStart Guide, Issue No. XXXX-22-01 Issue 1, January 2005 (Stock No. M9006-XXX) How to use a Custom Key to: •...
- Page 6 You are provided with 5 cleaning cards and 1 cleaning roller with each Rio 2 or Tango 2. You can purchase a Cleaning Kit (Magicard part no. M9005-761), which includes more cards, rollers and a cleaning pen.
- Page 7 'Properties' button that comes up from your application. There are 2 main pop-up control panels : • The Magicard Rio 2/Tango 2 Printer Properties • The Magicard Rio 2/Tango 2 Printer Advanced Normally, the Printer Properties panel will be all you need to set.
-
Page 8: Limited Warranty Information
1pm so that there is no delay in shipment of the loan printer if required. On receipt of the loan unit, please ship the defective product to your Magicard Service Center promptly to avoid rental charges for the loan unit. Retain all accessory items for use with the loan unit. - Page 9 Before transporting the printer, remove the dye film and card hoppers. Pack the printer in its original packaging. If you have a problem with the installation or operation of your Magicard printer, then first please recheck to ensure that you have followed the instructions given in this guide and on the CD ROM.
- Page 10 CONSUMABLES The Magicard Rio 2/Tango 2 is a dye-sublimation printer which transfers color from a dye film or ribbon onto the surface of a PVC printable card. For best results, use only Magicard dye film. Dye film and cards are available as follows:- Rio 2 and Tango 2 LC1 : YMCKO 5 panel dye film 350 images per roll (Part No.
-
Page 11: About This Guide
ABOUT THIS GUIDE This guide is to assist you with the set-up and use of your Rio 2 or Tango 2 ID card printer. The printer models covered by this document include:- M9006-749 - Magicard Rio 2 Secure ID card printer...
Need help?
Do you have a question about the RIO 2 and is the answer not in the manual?
Questions and answers