Start Here
Unpack Your Scanner
1
Make sure you have all the accessories shown below for your EPSON
scanner:
Perfection 4180 Photo scanner
(cover includes transparency unit)
Note: The contents may vary in certain locations.
2
Remove all the packing tape, but leave the large sticker in place until you are
instructed to remove it.
Install the Software
Wait! You must install your software before connecting the scanner to
your computer. The installation process may take several minutes. Be sure
to close all open programs and turn off any virus protection programs.
If you do not already have Adobe Photoshop or Photoshop Elements on your
computer, install Photoshop Elements from the CD-ROM included with your
scanner.
Note:
•
These instructions are for Windows
later, and OS X 10.2.x or later.
•
EPSON Scan does not support the UNIX File System (UFS) for Mac OS X.
You must install the software on a disk or in a partition that does not use
UFS.
•
Mac OS X 10.3 users: Do not use the Fast User Switching function while
using the scanner.
1
Insert the scanner software CD-ROM in the CD-ROM or DVD drive. The
installer starts automatically.
If it does not start, do the following:
•
Windows XP: Click Start, double-click My Computer, and then double-
click EPSON.
•
Windows 98 SE, Me, and 2000: Double-click My Computer, and then
double-click EPSON.
•
Mac OS X: Double-click the
CD-ROM with
EPSON Scan driver,
software, and
electronic manuals
®
®
Adobe
Photoshop
Elements 2.0 CD-ROM
IMPORTANT!
Leave the sticker in place until
you are instructed to remove it
Power cord and AC adapter
Slide holder
Transparency holder
USB cable
®
98 SE or later, Macintosh
EPSON CD-ROM icon.
®
film holder
®
OS 9.1 or
Need help?
Do you have a question about the PERFECTION 4180 PHOTO and is the answer not in the manual?
Questions and answers