Table of Contents
Advertisement
46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=3AHZ
-----END PGP PUBLIC KEY BLOCK-----
2.
At the shell prompt, import the key with the following command:
gpg --import redhat2.asc
The resulting message tells you that the key was processed. To check that the key was added, type
gpg --list-keys. You will see the key you just downloaded from Red Hat, as well as your
own keys.
4.6 Manual Package Installation
If you chose to download the software updates with the Red Hat Update Agent, over the Web through
Software Manager, or have RPM Updates delivered to your system automatically (but not have them
automatically installed), you must install them manually using the rpm utility.
To install them, change to the directory that contains the downloaded packages. The default directory
is /var/spool/up2date. Then, type the command rpm -Uvh *.rpm. When the packages are
finished installing, you can delete them if you wish. You do not need them anymore.
After installing the packages, you must update your System Profile so that you are not prompted to
download them again. Refer to Section 4.7, Syncronizing Your System Profile for details.
4.7 Syncronizing Your System Profile
If you configured the Red Hat Update Agent to install the latest packages automatically, then your
System Profile stored by Red Hat Network will be updated automatically also. However, if you only
download the latest RPM packages using the Red Hat Update Agent or through the Web interface
and upgrade or install the packages yourself, your System Profile will not be updated automatically.
If you remove packages, you need to update your RPM package list in your System Profile.
Chapter 4:Red Hat Update Agent
Advertisement
Table of Contents
