Text Mode Rhn Registration Client - Red Hat NETWORK - USER REFERENCE GUIDE 2.1 User Reference Manual

Section 2.6:Text Mode RHN Registration Client 27
Figure 2–13 Registration Finished

2.6 Text Mode RHN Registration Client

You can force the Red Hat Network Registration Client to run in text mode with the command:
rhn_register --nox
The screens for the Text Mode Red Hat Network Registration Client are almost identical to the
screens for the graphical version of Red Hat Network Registration Client. Some of the text in the
text mode version is more concise due to lack of space in the interface. However, there is an equal
number of screens and fields in both versions. Thus, if you are using the text mode version, you can
still follow the instructions that begin in Section 2.2, Starting the Red Hat Network Registration
Client .