Advertisement
Quick Links
Montage- und Betriebsanleitung
Installation and Operating Instructions
Mode d´emploi
Montage- en bedieningshandleiding
Istruzioni per l´uso
Instrucciones de montaje de servicio
Bruksanvisning för montering och drift
IPS/S 2.1
IP-Schnittstelle
DE
IP-Interface
EN
IP-Interface
FR
IP-Interface
NL
IP-Interface
IT
IP-Interface
ES
IP-Interface
SE
ABB i-bus
2CDG 941 053 P0002
KNX
®
Advertisement
Related Manuals for ABB IPS/S 2.1
Summary of Contents for ABB IPS/S 2.1
- Page 1 Montage- und Betriebsanleitung Installation and Operating Instructions Mode d´emploi Montage- en bedieningshandleiding Istruzioni per l´uso Instrucciones de montaje de servicio Bruksanvisning för montering och drift IPS/S 2.1 IP-Schnittstelle IP-Interface IP-Interface IP-Interface IP-Interface IP-Interface IP-Interface ABB i-bus ® 2CDG 941 053 P0002...
- Page 4 IP20 +45 C° 0 C°...
- Page 5 Device Connection ON LED LAN/LINK-LED Telegram LED 10...30 VDC connection KNX connection Programming LED Programming button Type-plate holder i LAN/Ethernet connection...
- Page 6 Device Description The IP Interface converts telegrams on the KNX into IP telegrams on the Ethernet network according to the configuration in the ETS. In this way, data can be exchanged between the KNX and the IP network. The IPS/S fulfils the requirements of the EIBnet/IP specification.
- Page 7 Operating and Display Elements On Lights green when the power supply is available and the device is ready for operation (approx. 80 sec after connection of power supply); blinks green when the devices starts or if an error has occurred. LAN/LINK ...
-
Page 8: Installation
Installation The device is suitable for installation in distribution boards or small enclosures and can be snapped onto 35 mm mounting rails according to DIN EN 60 715. Ensure that after the installation the device is always accessible for operation, testing, inspection, maintenance or repair. - Page 9 A detailed description of the parameter configuration and commissioning steps can be found in the technical data. This information can be downloaded from the Internet site: www.abb.com/KNX Important notes Installation and commissioning of the device may only be carried out by trained electricians. The...
- Page 10 - Protect the device against moisture, dirt and damage during transport, storage and operation! - Do not operate the device outside the specified technical data (e.g. Temperature range)! - The device may only be operated in closed enclosures (e.g. distribution boards) Cleaning Should the device become soiled, it may be cleaned with a dry cloth.
- Page 11 ABB STOTZ-KONTAKT GmbH Eppelheimer Straße 82, 69123 Heidelberg, Germany Postfach 10 16 80, 69006 Heidelberg, Germany v +49 (0) 6221 701 607 6 +49 (0) 6221 701 724 www.abb.com/knx www.abb.com/stotz-kontakt Technische Helpline / Technical Support: v +49 (0) 6221 701 434 E-Mail: knx.helpline@de.abb.com...
Need help?
Do you have a question about the IPS/S 2.1 and is the answer not in the manual?
Questions and answers