Adding Attributes To An Enrollment Form - Netscape MANAGEMENT SYSTEM 6.01 - PLUG-IN Manual

DNs in Certificate Management System
X500Name.attr.MYATTR3.oid=111.222.333.444.555.666
X500Name.attr.MYATTR3.class=netscape.security.x509.
Save your changes and close the file.
5.
Next, add each new attribute or component (for example,
6.
and
to an Enrollment Form" on page 316.
Restart the Certificate Manager.
7.
Reload the enrollment page and verify your changes; the new attributes that
8.
you added should now show up in the form.
To verify that the new attributes are in effect, request a certificate using the
9.
manual enrollment form.
Be sure to enter values for the new attributes (so that you can verify whether
they appear in certificate subject names). For example, you can enter the
following values for the new attributes and look for them in the subject name:
MYATTR1: a_value
MYATTR2: a.Value
MYATTR3: aValue
CN: John Doe
O: Example Corporation
Go to the agent interface and approve your request.
10.
When you receive the certificate, check the subject name. The certificate should
11.
show the new attribute values in the subject name.

Adding Attributes to an Enrollment Form

The steps below explain how to add an attribute (or component) to the Manual
enrollment form:
Go to this directory:
1.
Open the
2.
Find the line with the component name that the new component will follow
3.
and copy the table row, using the new component name. For the purposes of
this instruction, assume that the new component you want to add is
that it follows component
316 Netscape Certificate Management System Plug-Ins Guide • May 2002
IA5StringConverter
PrintableConverter
) to the enrollment form. For instructions, see "Adding Attributes
MYATTR3
<server_root>/cert-<instance_id>/web-apps/ee
ManUserEnroll.html
file in a text editor.
. Here's how you would add a table row for
OU
,
MYATTR1 MYATTR2
and
DC
:
DC