Netscape MANAGEMENT SYSTEM 6.01 - PLUG-IN Manual page 138

Table of Contents

Advertisement

AuthInfoAccessExt Plug-in Module
Description of parameters defined in the AuthInfoAccessExt module (Continued)
Table 4-2
Parameter
Description
Specifies the address or location to get additional information about the CA that has
ad<n>_location
issued the certificate in which this extension appears.
Permissible values: Depends on the location type you specified in the
ad<n>_location_type field.
• If you selected rfc822Name, the value must be a valid Internet mail address in
• If you selected directoryName, the value must be a string form of X.500 name,
• If you selected dNSName, the value must be a valid domain name in the
• If you selected ediPartyName, the value must be an IA5String. For example,
138
Netscape Certificate Management System Plug-Ins Guide • May 2002
the local-part@domain format; see the definition of an rfc822Name as
defined in RFC 822 (http://www.ietf.org/rfc/rfc0822.txt). You may
use upper and lower case letters in the mail address; no significance is attached to
the case. For example, ocspResponder@example.com.
similar to the subject name in a certificate, in the RFC 2253 syntax (see
http://www.ietf.org/rfc/rfc2253.txt). Note that RFC 2253 replaces
RFC 1779. For example, CN=corpDirectory, OU=IS, O=example.com,
C=US.
preferred-name syntax as specified in RFC 1034
(http://www.ietf.org/rfc/rfc1034.txt). You may use upper and lower
case letters in the domain name; no significance is attached to the case. Do not use
the string " " for the DNS name. Also don't use the DNS representation for
Internet mail addresses; such identities should be encoded as rfc822Name. For
example, ocspResponder.example.com.
Example Corporation.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Certificate management system 6.01

Table of Contents