Table of Contents
Advertisement
Parameters Accepted by the Approve Revocation Interface (Continued)
Table 3-2
Parameter
revokeAll
serialNumber
templateName
templateType
totalRecordCount
verifiedRecordCount
Response
The default response template is
JavaScript for responses is inserted in place of the
addition, the Approve Revocation interface adds the JavaScript variables listed in
the following table.
Format and Description
QUERY_FILTER
For information on constructing a query filter, see Table 3-19 in the
section for "List Certificates Interface" on page 78.
To ensure accuracy when revoking certificates, you should use a query
filter that selects each certificate by its serial number.
An example value for revokeAll to revoke certificates with serial
numbers 10 and 14 is:
(|(certRecordId=10)(certRecordId=14))
number
Specifies the serial number of a certificate to revoke.
string
Filename relative to the template directory (web-apps/ee/ca,
web-apps/ee/ra, web-apps/agent/ca, web-apps/agent/kra,
or web-apps/agent/ra) of a file to use as the response template. This
template will be used for any response, overriding default template
settings.
string
The name of the template to use for the response. The
reasonToRevoke.template file sets this to RevocationSuccess.
number
The total number of certificates selected by the revokeAll filter. This
number can be determined from the response variables in a template
used to select certificates for revocation.
number
Not presently used by the interface.
revocationResult.template
Approve Revocation Interface
. The base
<CMS_TEMPLATE>
Chapter 3
End-Entity Interface Reference
tag. In
45
Advertisement
Table of Contents
